Messaggero
I'd like to try this but I'm always nervous about cutting into the factory wiring harness. It makes it so ALL of your taillight LEDs light up when you brake. The way it is from the factory with the Adaptive Brake Lights the outer ring only lights under heavy braking....
http://www.m3forum.net/m3forum/showp...64&postcount=4
before.....
after......
Barry
Capo di tutti capi
Thanks
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Big Earner
You should be able to turn this off in ncs expert without making any physical changes. Changing BFD_ON to nicht_aktive should do the trick. I can't confirm this though since I don't have the fancy led lights
Messaggero
Interesting. That would be nice, save from cutting into your wiring harness.Originally Posted by ryankokesh
You should be able to turn this off in ncs expert without making any physical changes. Changing BFD_ON to nicht_aktive should do the trick. I can't confirm this though since I don't have the fancy led lights
Thanks
Posting Permissions
Reply With Quote
