Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 3 of 12 FirstFirst 12345 ... LastLast
Results 21 to 30 of 114
  1. #21
    Join Date
    Dec 2016
    Location
    Boston, MA
    Posts
    643
    Quote Originally Posted by holyc0w View Post
    Is this on a computer? You can use the insert video button and then drop the link in there.

    You can also use the bbcode and drop the link in between. This may also work on tapatalk???
    Thanks. Tried using the 'insert video' button but it still showed up as a link...maybe it's because it still had the 's' after http. I'll try editing it.

    Anyway - thanks for embedding it above.

    (edit; Yup, that was it... Shows up now when I use the 'insert video' button without the 's'.)

  2. #22
    Join Date
    Dec 2016
    Location
    Boston, MA
    Posts
    643
    Quote Originally Posted by cornercarver View Post
    Shipping April 3rd; ECS Tuning lug bolt conversion and Turner FCAB's
    I'm 0 for 3 this month; Modbargains is dragging their feet getting my Sportlines shipped (ordered 3/2/18,) Avin cancelled my kidney grilles order, and now ECS tuning emailed me to say the lug bolt conversion and FCAB's are delayed until 4/23.

    WTF??

  3. #23
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,274
    Quote Originally Posted by cornercarver View Post
    I'm 0 for 3 this month; Modbargains is dragging their feet getting my Sportlines shipped (ordered 3/2/18,) Avin cancelled my kidney grilles order, and now ECS tuning emailed me to say the lug bolt conversion and FCAB's are delayed until 4/23.

    WTF??
    Bummer, man. That's tough. Time to take all that money and dump it into a more reliable supplier, such as ESS Tuning and their superchargers?

  4. #24
    Join Date
    Dec 2016
    Location
    Boston, MA
    Posts
    643
    As much as I’d love to buy a supercharger, it’s a high-dollar add that I won’t be able to swing for a while, and spending $5k on a car for which I only paid $8k is hard to justify. It’s also a risky endeavor on an engine with 126k miles without rebuilding it, or at least o-ringing the head gaskets.

    That said, I’m laying the groundwork for more HP incrementally. I’ve always felt you need to have the right foundation for power-adders first.

  5. #25
    Join Date
    May 2011
    Location
    Charleston SC
    Posts
    6,149
    ESS supercharger isn't really plug and play. I've had a lot of tuning and drive ability issues with mine. Sometimes I wish I had just left the car alone after installing headers. It ran the best then.
    BTW no need to do anything to the engine for the SC. It's only putting out 8.5 lbs of boost. Not enough to break anything or blow a head gasket
    Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
    M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
    H&R sport springs,
    UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
    Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers

  6. #26
    Join Date
    Dec 2016
    Location
    Boston, MA
    Posts
    643
    Quote Originally Posted by Sockethead View Post
    ESS supercharger isn't really plug and play. I've had a lot of tuning and drive ability issues with mine. Sometimes I wish I had just left the car alone after installing headers. It ran the best then.
    BTW no need to do anything to the engine for the SC. It's only putting out 8.5 lbs of boost. Not enough to break anything or blow a head gasket
    Which headers did you do? That's on my wish list, probably after an LSD. I'm not sure I could get away with them in MA though. If they do a visual inspection of emissions components it will fail.

  7. #27
    Join Date
    May 2011
    Location
    Charleston SC
    Posts
    6,149
    I went with Bimmerbrakes Gen3 and stock exhaust.... really woke up the engine.

    IDK how deep they go for the visual inspection... in Jersey it was a camera in the floor. The headers are pretty well hidden by the aluminum support pan and the plastic splash pan. There is no way they'd be able to tell using that setup.
    Code out the secondary O2 sensors. You can leave the secondary air pump in place for visual inspection, that won't hurt anything.
    Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
    M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
    H&R sport springs,
    UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
    Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers

  8. #28
    Join Date
    Dec 2016
    Location
    Boston, MA
    Posts
    643
    FINALLY got something I ordered last month...

    Name:  D3DFA5D1-8DA8-4A74-BAB0-F66B18CD3AFD.jpeg
Views: 438
Size:  212.1 KB

    Those of you who have done the lug conversion; any pointers? Any reason it can’t be done with the rotors in place or do they have to come off? I’m hoping to do it this weekend... I won’t have much time, and not removing the rotors would save a lot.
    -Chris


  9. #29
    Join Date
    May 2011
    Location
    Charleston SC
    Posts
    6,149
    Use loctite on the threads. Double up two lugnuts to tighten unless you got the ones with the allen key in the end. No need to remove anything but the wheeel
    Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
    M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
    H&R sport springs,
    UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
    Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers

  10. #30
    Join Date
    Dec 2016
    Location
    Boston, MA
    Posts
    643
    Thanks. I wasn’t sure if the shoulder on the stud would clear the hole in the rotor.

    These studs have the allen key... Don’t know how I’m going to torque them with an allen though; may have to use the ‘two nut’ method.
    -Chris


Page 3 of 12 FirstFirst 12345 ... LastLast

Similar Threads

  1. Corner Light Condensation
    By MiniD in forum Lighting
    Replies: 10
    Last Post: 09-11-2013, 09:41 PM
  2. Best place to buy an oem corner
    By HokieZHP in forum Lighting
    Replies: 9
    Last Post: 03-29-2013, 04:44 AM
  3. Sidemarkers and corner lenses
    By Newjack in forum General -- ZHP Related
    Replies: 36
    Last Post: 01-14-2012, 06:35 PM
  4. Replies: 9
    Last Post: 02-21-2011, 04:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •