Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2023
    Location
    Denton TX
    Posts
    79

    Vacuum hose replacement questions

    Gents,

    Still learning here and got supremely confused and figured out while doing that not all E46s are not the same when it comes to vac tubing lol. Mine is a 2003 w/ manual transmission.

    I was just about to start my VANOS rebuild when I started to have an on again, off again issue w/ the front 02 sensor going off. So I bought two pre-02 sensors. I also had planned to refresh the vacuum tubes...but unfortunately I started to watch a lot of YT vids where they showed other non-ZHP procedures to remove the Vacuum control valve, check valve, replace vac hoses, etc. So I was going in with that mindset that I needed to do all of that, but discovered today that those 3 male ends behind the right side of the intake manifold were capped off. On another note, that BMW designer should be slapped for putting them there. For future readers of this thread, here's what I'm talking about:



    Well, that saves me some work so that's a good thing. The larger plugs (BMW-11611727176) is still in good shape with a tiny tear, but I have a new one on the way. The 2 smaller plugs (11611437560) were in fine shape, but I decided to replace them with 5/32" auto vac plugs that I had on hand. I'm glad our ZHPs dont have that VCV, looks like a b___ to get off due to lack of hand space. I noted too that there's no more vac hose from the secondary air pump valve (think that's the name---on pass side near the big secondary air pump) to change. Good.

    So please check my understanding here. The remaining vac lines / hoses to replace on our ZHPs are:

    • Thinner vac hose ends from the F-elbow to the fuel pressure regulator
    • Thicker hose from the F-elbow to a Y-junction that continues downward to the intake
    • Thicker hose going to the brake booster


    Of course, the PCV is on the list but it appears that the PO's former mechanic changed it out at 80K and I'm at 99K.

    Gents as always, I appreciate any answers (pics are a bonus), links, etc.

  2. #2
    Join Date
    Sep 2018
    Location
    Austin, Tx
    Posts
    329
    The difference is MS42/43 vs MS45.x engine management, not ZHP vs non.

    On early cars, the secondary air non return valve is opened via vacuum, so you have the solenoid valve pictured that allows vacuum to reach the valve.

    On later cars, the secondary air non return valve is opened via air pressure from the pump, so there is no need for the vacuum system like the earlier cars.

    • Thinner vac hose ends from the F-elbow to the fuel pressure regulator
    • Thicker hose from the F-elbow to a Y-junction that continues downward to the intake
    • Thicker hose going to the brake booster


    This is correct. Also note the hose going to the fuel pressure isn't to apply vacuum to the FPR, its to catch any fuel from spilling if the FPR diaphragm fails and leaks.
    Current Garage... '00 R11S, '09 HP2S, '12 R12GSA, '00 Black 323iT (wife's), '02 Alpine 325iT (Eileen, Track Wagon), '02 Japan Rot 325iT

    Instagram @ HillPerformanceBimmers
    Email to George@HillPerformance.com

  3. #3
    Join Date
    Jul 2023
    Location
    Denton TX
    Posts
    79
    Autozone.com
    George,

    I appreciate the education on the differences and purpose of the fuel pressure hose.

    Bob

Similar Threads

  1. Need help with vacuum lines
    By phillipjfry in forum Maintenance
    Replies: 6
    Last Post: 11-04-2019, 07:58 PM
  2. Any ideas for a good vacuum cleaner ?
    By fredo in forum Detailing
    Replies: 6
    Last Post: 08-07-2017, 05:23 PM
  3. Replies: 27
    Last Post: 04-06-2014, 06:43 AM
  4. Do it Yourself method to find a vacuum leak?
    By BustedBoat in forum Mechanical | Troubleshooting
    Replies: 3
    Last Post: 05-23-2012, 03:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •