Page 1439 of 1456 FirstFirst ... 439939133913891429143714381439144014411449 ... LastLast
Results 14,381 to 14,390 of 14558

Thread: Post your daily ZHP/BMW/MINI pics!

  1. #14381
    Join Date
    Nov 2017
    Location
    Seattle
    Posts
    568
    this might be my new favorite car on the forum
    ~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
    Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
    My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality

  2. #14382
    Join Date
    May 2014
    Location
    Middle O' Nowhere, Virginia
    Posts
    1,425
    Last shot of the carbon trunk before it gets repainted back to TiAg. Weather has been rather...odd...here in VA. So that'll be getting painted in the washroom. It's rather ridiculously large for some reason. Think the previous home owner used it as a pantry. I'll tell the fiance after the fact. Plenty of time while the car is hiding for the winter. Hood will get the same treatment later on.

    Eventually I'll be pulling the front bumper off and either repairing or replacing it. After many, maaany cross country trips and track days, it's at the end of its lifespan.

    Sent from my moto z4 using Tapatalk
    Last edited by Fenrir; 12-29-2020 at 04:45 PM.

    AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife 3.07 Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, something something forged internals, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
    -Ben

  3. #14383
    Join Date
    Apr 2016
    Location
    Katonah, NY
    Posts
    771
    Quote Originally Posted by Fenrir View Post
    I'll tell the fiance after the fact.
    I mean..... is there any other way? lmao

  4. #14384
    Join Date
    May 2014
    Location
    Middle O' Nowhere, Virginia
    Posts
    1,425
    Quote Originally Posted by joeybananaz18 View Post
    I mean..... is there any other way? lmao
    Better to ask for forgiveness lol.

    Sent from my moto z4 using Tapatalk

    AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife 3.07 Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, something something forged internals, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
    -Ben

  5. #14385
    Join Date
    Nov 2017
    Location
    Seattle
    Posts
    568
    Quote Originally Posted by Fenrir View Post
    Eventually I'll be pulling the front bumper off and either repairing or replacing it. After many, maaany cross country trips and track days, it's at the end of its lifespan.
    I'd love to know what kind of repairs you will do to your bumper and how. My bumper is also at the end of its ropes, and i want to try to prolong replacing it if i can.
    ~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
    Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
    My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality

  6. #14386
    Join Date
    May 2014
    Location
    Middle O' Nowhere, Virginia
    Posts
    1,425
    Pretty much sanding the whole thing down and repainting. There's a hairline crack under my passenger fog lamp. That, I'll probably use some fiberglass on the underside to seat it and maaaybe a polyurethane to seal the top side of the crack. Then sand it again. It's worked on a few projects before for minute issues. But, I'll need to make sure it will play nice with the surrounding bumper plastics and whatever base coat I use.

    Next thing is to look at the plastics behind the bumper. When these things get old, the clips mounted on the bumper will break, causing the edges to pull away from the underside of the headlights. I'm hoping anything I find behind it is repaireable to some extent.

    Honestly? If it's too far gone, I may just bite the bullet and pick up another ZHP bumper in the primer and start fresh.
    Last edited by Fenrir; 12-29-2020 at 12:13 PM.

    AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife 3.07 Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, something something forged internals, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
    -Ben

  7. #14387
    Join Date
    Jan 1970
    Location
    Southern California
    Posts
    17,801
    That hood is a beauty!

    Sent from my SM-G988U using Tapatalk
    Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
    "ZHP or not, I still like you"


    ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
    ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
    Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
    Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
    BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
    Note: Actual car no longer resembles signature picture

  8. #14388
    Join Date
    Jan 1970
    Location
    Lexington, KY
    Posts
    4,503
    After the white Christmas we had in Kentucky, I washed the salt away today.

    325i, 2005, 5MT, Silvergrey, leatherette, Sport package; CDV delete, KONI STR-T & KYB Excel-G, Weisslichts, Stewart H2O pump

    328i, 2010, 6MT, Spacegrey, dakota leather, M-sport packages; has a 330 intake but no tune - yet
    http://s900.photobucket.com/user/othibau/media/Junesig.jpg.html][IMG]http://i900.photobucket.com/albums/ac208/othibau/Junesig.jpg

  9. #14389
    Join Date
    Jan 1970
    Location
    NJ
    Posts
    2,002
    First bath and joyride of 2021.

    Sent from my Pixel 5 using Tapatalk
    - Marc

  10. #14390
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    4,204
    Felt great this morning being back at Huntsville Coffee n Cars, with my ZHP! Put a few mor miles on her too.






    Sent from my iPhone Xs using Tapatalk

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

Page 1439 of 1456 FirstFirst ... 439939133913891429143714381439144014411449 ... LastLast

Similar Threads

  1. Post your track/auto-x Pics!!
    By Rovert in forum Track and AutoX
    Replies: 325
    Last Post: 11-02-2015, 01:24 PM
  2. Anyone want to post up pics of their alcantara wheel re-wrap?
    By nike001 in forum General -- ZHP Related
    Replies: 322
    Last Post: 10-07-2015, 05:05 PM
  3. Post up the pics of your ZHPMafia.com business cards!!!
    By danewilson77 in forum ZHP Gallery and Video Section
    Replies: 28
    Last Post: 08-23-2011, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •