Can this or will this end the clay bar? - NanoSkin AutoScrub

[DetailersDomain]

NANOSKIN Autoscrub 6 inch Pad - Better and Faster than Claying



Wow is all I can say about this new tool and new technology. I believe this will change the way most pro detailers and DIYers will prep their cars. This is truly a time saver and will pay for itself after a couple detail jobs. We have spent in some cases 1-2 hours claying and prepping a midsize sedan (in rough shape) we recently tested the AutoScrub on an Audi S8 and we were finished in about 15 minutes! You really won't believe this until you try it yourself. The AutoScrub will make you leave your clay bar behind.

NANOSKIN AutoScrub works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.

A dual action orbital polisher is required. AutoScrub will safely and easily removes paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.

AutoScrub works great with your favorite detail spray or clay lubricant. Unlike the clay bar, the AutoScrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AutoScrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.

AutoScrub allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Features
- Lasts up to 4 times longer than clay bars
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
- Up to 50-60 uses before you need to replace it

Directions
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficient detail spray or clay lubricant onto the surface evenly.
3. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
4. Wipe off residue and move on to compound and polishing or even go straight to your last step.

Important tips:
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- DO NOT use water
- DO NOT use with rotary polisher.

Take a look at the 3 offers we have. Pre Order Pricing is in effect, we should have the first wave by Friday.



NanoSkin AutoScrub 3 inch Kit
NanoSkin AutoScrub 6 inch Kit
Nano Skin AutoScrub 6 Inch Pad

Various photos of how the pad looks and works

3 inch pad kit




6 inch pad on the Griots on an Uber 5 inch backing plate

[danewilson77]

Looks like a great product. Thanks for the info. I will be picking this up.

[nike001]

This will most likely be on my next order as well.

Bookmarked!!

[danewilson77]

Short video here. Could not listen to words at library.

[DetailersDomain]

those at eurofest next week can take this for a spin.

[M0nk3y]

How much marring is produced with this?

[zhp43867]

Looks like they're claiming none (in the video above), pretty much just like clay bars. "Ideal use yields no marring" (<- typical clay bar claim) etc. so I assume a similar amount to a clay bar.

[kayger12]

Looks order-worthy.

I wish this was sent with a Galaxy S3

[M0nk3y]

Looks like they're claiming none (in the video above), pretty much just like clay bars. "Ideal use yields no marring" (&lt;- typical clay bar claim) etc. so I assume a similar amount to a clay bar.

I'm just wondering because it's a product that you can never need over and get a fresh surface.

It seems like your going to ground alot of particles into the paint...even if you can 'wash' it.

I'm not a fan right now

Sent from my DROID X2 using Tapatalk 2

[zhp43867]

I'm skeptical too, but clay bars also cause marring always, the extent of which depends on how it is used/lubricated/folded over. If nike001 orders it I can take a look (maybe)

Edit: So I did a little research. It does seem to have a mesh or web to absorb some contaminants, but when I searched "nanoskin autopia" I got to a thread where one person said it did cause marring on a Mclaren MP4-12C. So I guess we'll see...