If i get a 3.64 LSD for my zhp will it go right up or do i have to byu other components aside the differential? thanks
If i get a 3.64 LSD for my zhp will it go right up or do i have to byu other components aside the differential? thanks
ZHPMAFIA
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.
Is it from a non M?
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Unless it is an after market unit made for non M, it will not fit.
"Arnold smoking a cigar in the Red Square; your argument is invalid." -Galaxy S5
In the market for an E90 M3
Did you mean 3.62 M3 large case? No it doesn't just bolt in
yeah i meant 3.62 from a m, so i know i would need the rear axles would i need subframe and driveshaft?
ZHPMAFIA
Yep! Derbo is a expert on the matter and I think Wyatt just did the same thing. I will be also doing the LSD swap as well and have a whole rear end and brakes all around to swap into my car as well. So it's not really a easy task however it's possible. To make it a direct swap you would need a aftermarket one.
Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens
Derek has a M3 rear end, Wyatt has an OS Giken unit.
Send derbo a message
you will go nuts on the highway if you go to the M3 diff on a 330...the rpm will make you want for a 7th or even 8th gear
- Stuart
/_________\
OO=[][]=OO