Fixed seats pull away from the back at the top, and slide out of locking mechanisms on the bottom. When you remove the seat bottom you'll be able to see said mechanisms.Originally Posted by Hornung418
Campieri
Fixed seats pull away from the back at the top, and slide out of locking mechanisms on the bottom. When you remove the seat bottom you'll be able to see said mechanisms.
In the market for an E90 M3
Campieri
I had to remove my rear headrest...it was hold in it in place. Will experiment tomorrow evening
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Consigliere
As far as rear headrests go, which is the proper way to have them ? I'm talking about the pole which holds them in place since it had a bend in it.
Campieri
I only had to remove the center head rest. Haven't touched others...
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Campieri
Only center needs removal to remove the seat. To remove the shelf, you'll have to pull out the other two as well. It's a bit hard to get leverage, though. They are usually in there tight.
In the market for an E90 M3
Campieri
I would just like to state that my original intent with this mod was to deal with my faded deck. I installed the 'rattle solution' as a preventative measure
Posting Permissions
Reply With Quote
