Hey All,

I'm planning to change out my wheels and hoping to get some advice/guidance here. I want to make sure they fit correctly and don't want to deal with any rubbing issues.

I'm looking at the BBS CH-R (18x8 in front, 18x9 in rear). According to Tirerack, I can run the same size tires as I have on my stock 135s.

Front: 18x8, 40mm offset
Rear: 18x9, 44mm offset

Doing some research online, it appears that the fronts will poke out 7mm more than the stock rims. With the rears, the inner rim will be .4mm closer to the suspension strut and the outer rim will poke out 12.4 mm more than the stock rims.

Has anyone here run this setup successfully without any issues or rubbing? Any pictures by chance? I could go 18x8 all around, but prefer the staggered setup.

Sorry if this topic has been beaten to death. Figured I would pose the question and get some helps from you all.

Thanks in advance!