The Scarlett Thread...Daniel/NoVAphotog's Project and Maintenance Thread

[Vas]

Looks good.

[ELCID86]

Riding with Dan now and can confirm minor rubbing in the rear on some terrain. He plans a fender roll this weekend.


Thumbs, iPhone, Tapatalk.

[Vas]

Any unwanted harmonics though from the spacers through the steering wheel?

[ELCID86]

We can't hear any harmonicas, but he is playing blue grass music.


Thumbs, iPhone, Tapatalk.

[BCS_ZHP]

If you see Ned Beatty, drive faster...

[BRGcoopahS]

Those studs look awesome. Whats the benefit of having them?

[NoVAphotog]

Those studs look awesome. Whats the benefit of having them?

Thanks man, and they make wheel changes significantly easier. Just put the wheel on and tighten the nuts, no having to get down and awkwardly sprain your back trying to line up the wheel and maneuver a bolt in! Also, by extension, makes running the spacers easier for the same reason. Just slide them on.

Sent from an HTC One

[BRGcoopahS]

I'm sold.

[zhp05jb]

Turner Motorsport 90mm studs installed along with Turner 12.5mm wheel spacers front and rear.

Have you noticed any rubbing on the rear? I currently have 15mm H&R and it rubs when I have rear passengers so I'm planning to go to 12mm instead.

[NoVAphotog]

Have you noticed any rubbing on the rear? I currently have 15mm H&R and it rubs when I have rear passengers so I'm planning to go to 12mm instead.

We noticed some rubbing on the way down to the Reunion meet on the highway going over bridge and other roadway depressions, that was with the car loaded down with a large amount of stuff though. I took them off for the return trip because I didn't want to deal with it (did not fender roll). I'm going to add them back on and see how it does around town unloaded and I do plan on a fender roll eventually. Fronts did great, no harmonics or rubbing with 12mm.