Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 10 of 173

Hybrid View

  1. #1
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,926
    Lots of snacks under those seats ey

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  2. #2
    Join Date
    Aug 2014
    Location
    St. Paul, Minnesota
    Posts
    494
    Quote Originally Posted by Ssparrow View Post
    Nice! How hard are the seats to
    Remove? It looks pretty straightforward
    Very straight forward! 2 bolts in back, 1 seat belt bolt and 2 nuts up front. All 16mm. I would undo the seat belt bolt first lol learned the hard way... Put the seat at its highest setting to get to it without any issue. Undo the rest of the bolts and then disconnect your battery. Disconnect the clip under the seat and pull 'em out!

    Quote Originally Posted by Vas View Post
    Lots of snacks under those seats ey
    Yes ha probably was the first time those seats came out of the car. Found a pile of stuff that looked like sawdust under the passenger seat...

    18x9 ET 42 Apex EC-7's / BC Racing BR Type Coilovers / GruppeM Intake
    ECS SS Brake Lines / Coby Wheel Wrap w/ Tri-Stitch / 35% Tint / BavSound Stage 1 / Stett Intake Boots / OE Euro Clears

  3. #3
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,253
    Nice work. It's good to know your car is clean even where the sun don't shine.

    Quote Originally Posted by Jconlin16 View Post
    Very straight forward! 2 bolts in back, 1 seat belt bolt and 2 nuts up front. All 16mm. I would undo the seat belt bolt first lol learned the hard way... Put the seat at its highest setting to get to it without any issue. Undo the rest of the bolts and then disconnect your battery. Disconnect the clip under the seat and pull 'em out!
    Yup, even easier in a coupe: you can skip the seat belt bolt.

    Quote Originally Posted by Jconlin16 View Post
    Yes ha probably was the first time those seats came out of the car. Found a pile of stuff that looked like sawdust under the passenger seat...
    When I lived in Philly I moved some cut lumber in my car for a buddy. I kept finding sawdust months afterwards.

  4. #4
    Join Date
    Jan 2016
    Location
    Helena, AL
    Posts
    633
    Quote Originally Posted by Jconlin16 View Post
    Very straight forward! 2 bolts in back, 1 seat belt bolt and 2 nuts up front. All 16mm. I would undo the seat belt bolt first lol learned the hard way... Put the seat at its highest setting to get to it without any issue. Undo the rest of the bolts and then disconnect your battery. Disconnect the clip under the seat and pull 'em out!
    I'm assuming you want to disconnect the battery first before disconnecting the seat connector to prevent airbag light issues??

    Frank W.

    Present
    2003 BMW 530iA Saphirschwarz Metallic

    Past
    2006 BMW 330ci ZHP 6MT Silbergrau Metallic
    2014 BMW X1 xDrive35i ///M-Sport Mineralgrau Metallic
    2011 BMW 328i 6MT ///M-Sport Alpenweiss
    1999 BMW ///M Roadster Estorilblau Metallic


    plus an assortment of VW, Honda, Mazda, Chevrolet, Nissan, Toyota, and others over the years


  5. #5
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,253
    Quote Originally Posted by fw_fw View Post
    I'm assuming you want to disconnect the battery first before disconnecting the seat connector to prevent airbag light issues??
    Yup. Center the seat on the rails, raise the seat up, disconnect the battery, then disconnect the seat wiring harness.

  6. #6
    Join Date
    Aug 2014
    Location
    St. Paul, Minnesota
    Posts
    494
    Quote Originally Posted by BMWCurves View Post
    Nice work. It's good to know your car is clean even where the sun don't shine.

    When I lived in Philly I moved some cut lumber in my car for a buddy. I kept finding sawdust months afterwards.
    Such a good feeling to have a clean interior. Now I just have to try to keep it clean!

    I bet, that would frustrate me! I've heard that people find some interesting things under their seats but I wasn't so lucky.

    Quote Originally Posted by BMWCurves View Post
    Yup. Center the seat on the rails, raise the seat up, disconnect the battery, then disconnect the seat wiring harness.
    Yep, exactly.

    18x9 ET 42 Apex EC-7's / BC Racing BR Type Coilovers / GruppeM Intake
    ECS SS Brake Lines / Coby Wheel Wrap w/ Tri-Stitch / 35% Tint / BavSound Stage 1 / Stett Intake Boots / OE Euro Clears

Similar Threads

  1. Replies: 594
    Last Post: 11-09-2017, 08:07 PM
  2. Replies: 769
    Last Post: 07-28-2017, 08:55 AM
  3. Zooey the ZHP Maintenance Thread
    By JanMatt in forum Projects
    Replies: 29
    Last Post: 03-08-2016, 07:07 PM
  4. 94jedi's ZHP build/mod/maintenance thread....
    By 94jedi in forum Projects
    Replies: 29
    Last Post: 04-27-2015, 03:11 AM
  5. al.330imola Build/Maintenance Thread
    By al.330imola in forum Projects
    Replies: 12
    Last Post: 06-05-2014, 03:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •