Campieri
it's all about being content with what you have, charlie - whether you have a little, or have a lot! i'm sure you'll enjoy every moment.Originally Posted by cakM3
Of course while all of this is going on, I will be forced to drive either my M3 or Porsche while the ZHP is tucked away inside one of my garages
(thanks to paul for the help with that one - philippians 4:11-13)
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Capo
to be honest Peter, I enjoy daily driving my ZHP the most. It is a car that I feel the most comfortable driving in.... anyway, I'll see what I can do to helpit's all about being content with what you have, charlie - whether you have a little, or have a lot! i'm sure you'll enjoy every moment.
(thanks to paul for the help with that one - philippians 4:11-13
Messaggero
Either way, must be rough...
2016 BMW M340i
BMW CCA Member . Dinan Stage 1 Software . Dinan 3.5" Exhaust . Dinan CAI & Turbo Inlet . VSRF Charge Pipe . H&R Sport Springs . CF: Front Splitter, Rear Valance, Trunk Spoiler, Roof Spoiler, M3 Mirror Covers . BMW Performance pedals . Gloss black ///M kidneys . 12mm F / 15mm R BMS Spacers. NGK 94201 Plugs .
2013 BMW X5 M-Sport - Sold
2009 550i M-Sport - Sold
2006 650i Vert - Sold
2004 330i ZHP - Dead
2001 330i Sport - Sold
2004 330i ZHP - Sold
1999 E36 M3 - Sold
Campieri
I know exactly what you meanto be honest Peter, I enjoy daily driving my ZHP the most. It is a car that I feel the most comfortable driving in....
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
I know exactly what you mean
Sent from my iPhone6S using Tapatalk Pro
Enforcer
That would be so cool if you could get those scanned and created!
2003 BMW 330i ZHP
ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
Turner Motorsports - Powerflex - Hawk Performance
Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
Wheelwell: 2003 BMW 3 Series
Fuelly: 2003 BMW 330i
Capo
Sergy (Rus_ZHP) has the ability to 3D print these mirror motor baseplates and the fitment and alignment is spot on. I recently helped Sergy update his side mirrors on his touring to OEM M3 side mirrors and after it was finished the mirrors were aligned perfectly all the way around the mirror housing. It looked as if it was OEM. Just contact Sergy via PM if you're looking to get a set. Expect to pay him for his time and shipping. Believe me, it is worth it.
Last edited by cakM3; 06-29-2020 at 04:25 AM.
Campieri
you. da. man.Mirrors and baseplates are getting scanned right now. Once they are done I will be donating my sedan mirror base plates for Tony to scan then we'll be in business! I need to refinish my sedan baseplates anyway so it will be nice to take the ZHP offline for a bit to address other maintenance issues while the sedan baseplates are getting scanned
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Capo
thanks Peter! well... not really donating but letting Tony borrow so he can scan... I plan on getting my baseplates back
Soldier
Did you ever get these scanned?
If you could send me the file, I'd very much appreciate it!
My M3 wagon got hit in a parking lot this morning, and the mirror got knocked off-- feels like now or never on M3 mirror retrofit!
I'd be happy to cut out some extras and send them to anyone that needs a set!
TIA!
Current Cars: 2005 IR/IR M3, 2001 LMB/blk M5, 2003 530i 5mt, 04 M3 wagon (with ZHP interior and exterior trimmings)
Past cars: 04 M3, 96 M3, S50B32 e36 M3 CM race car, 6mt NA RWD e91
Posting Permissions
Reply With Quote
