Stett is the maker of 330 intake boots.
RootedDROIDXstatus. Come at me, bro.
Stett is the maker of 330 intake boots.
RootedDROIDXstatus. Come at me, bro.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Link Justin?
"The server is too busy at the moment. Please try again later."
2009 Horizon Blue Mini R56 Cooper S 6spd
2012 Pepper White Mini R56 "Justa" Cooper 6spd
On the hunt for an e30, z3, or 318ti...
http://www.shop.stettperformance.com...2&categoryId=4
I thought they made a single piece.
David has one on his ZHP.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Sweet! Thanks
Stettperformance even offers silicone rad hoses. I wonder when the M52tu and M54b25 silicone intake hoses will be ready?
"The server is too busy at the moment. Please try again later."
2009 Horizon Blue Mini R56 Cooper S 6spd
2012 Pepper White Mini R56 "Justa" Cooper 6spd
On the hunt for an e30, z3, or 318ti...
Not sure. I believe it was an e46f forum project. But the Silicone Rad Hoses do look very nice!
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Ok so upon further investigation I broke this. Runs allllll the wayyy down in the engine bay. How bad is it/is my car drivable?
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
Its a vac line. Easily fixable with a new connecting hose. Pull off both pieces of outer rubber and affix with a new one. As a cheap fix you can use a piece of metal tubing and shove the two pieces together. Some track day fixes for your Daily Driver
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
So the line inside the rubber connector was never connected to itself? It was just the outer rubber? Ok that makes me feel better.
Any other quick fixes? Heatshrink?That could be found in a garage before say work at 8am tomorrow? Lol
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
That would also work. But if you have an old Antenna for an RC car or something, that can be broken into an inch long piece, and wedged in between them. I've got several 'rigged' vac lines. I don't have time to replace the ones deep behind the intake manifold. I've had no issues in the year that I've had them like that.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Lol the r/c antenna was the first thing I grabbed. Too small though. I found some tube in my garage up in the garden section and it fit perfectly. Good thing my dads a pack rat.
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD