They look pretty nice if you had to ask me. Which ones did you order again? I'm going to consider getting the weisslicht ones since the umnitza doesn't fit correctly.
Messaggero
They look pretty nice if you had to ask me. Which ones did you order again? I'm going to consider getting the weisslicht ones since the umnitza doesn't fit correctly.
Enforcer
Those ballasts appear to be adapters if you have halogen headlamps/angel eyes.Originally Posted by Crickett
2007 Interlagos Blue BMW M5 SMG
Eibach Springs, 12mm Spacers, Dinan Exhaust, Res Delete, Stage 3 AEM CAI, Eurocharged Tune, 35% tints.
Capo di tutti capi
Mine did not have those extra modules.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Messaggero
Upon closer inspection, whatever those modules are, they're required to physically connect the rings to the power wires from the harness. Kinda wanna open one up to see what's inside . . .
Agreed, these seem to be pretty high quality! They're the WeissLicht frosted 66-LED for Xenon headlights from Bimmian.
EDIT: Went ahead & opened up one end; it looks like it's just a waterproof casing for the connection between the power wires & the feeds to each ring:
Each module has a power & ground wire with a butt connector running into it, then two pairs of pink & white wires with plugs on the ends that connect to the rings:
Travis | ’04ZHP sedan 6MT | WeĭssLĭcht AEs | BMW clears | Plasti-Dipped grilles | BMW Perf. intake | TMS Power Pulleys | DIY aux-in | !CDV
Sprint Booster w/Sport button | Mich PS AS4 (245 sq) | M3 front sway | Z4M LCABs | Beisan VANOS rebuild | GAS DISA rebuild | BMW diag. PC
Messaggero
In for installed pics Travis...
"Lapit mga kaibigan at makinig kayo, ako'y may dala-dalang balita galing sa bayan ko
Nais kong ipamahagi ang mga kwento at mga pangyayaring nagaganap sa lupang ipinangako..."
Campieri
the only thing that I'm now 'missing' is the trap door by the oil drain plug
before
after
Campieri
Verrrr nice! How much?
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Big Earner
This is all i have so far and it sucks but the new gloss black grills on the black car are fully.
"No, Donny, these men are nihilists, there's nothing to be afraid of"
09 135i Msport 6mt
04 330i ZHP (sold)
David
Campieri
way too much
No. - Description - Qty - Part Number - Price - Notes
01 - Strut brace - 1 - 51710429378 - $1,522.00 - See EBA 0433095
02 - Self-locking collar nut - 2 - 07119904295 - $0.36
03 - Hex nut - 4 - 51717895241 $9.77
04 - Cap - 6 - 51717896829 - $3.62
05 - Grommet - 1 - 51141807495 - $0.68
Last edited by Hermes; 01-31-2013 at 06:44 PM.
Big Earner
Sweet! Did you do the grip and pull removal method?This is all i have so far and it sucks but the new gloss black grills on the black car are fully.
- Marc
Posting Permissions
Reply With Quote
