Post your daily ZHP/BMW/MINI pics!

Quote:

---

Originally Posted by oclvframe

My wife parked next to me at our church where our son was about to have his Eagle Scout Board of Review

---

Hope it went well. If so, congrats to your son.

Quote:

---

Originally Posted by az3579

Diggin' the yellow fogs I put in. Put 'em to good use today...
Not sure if I'm going to transfer the X5 LED fog assemblies into my housings at this point yet...

https://c1.staticflickr.com/4/3945/3...4248de20_k.jpgIMG_20170301_072020 by botond.pal, on Flickr

---

Looks good BP. [emoji106]

Are your X5 LED fogs in the stock housing?

Quote:

---

Originally Posted by WOLFN8TR

Looks good BP. [emoji106]

Are your X5 LED fogs in the stock housing?

---

+1 want to know. I'm retrofitting ES300/IS300 yellow fog projectors, and I'm curious about how you did it. I'm not looking forward to fabricating another set of brackets.

Quote:

---

Originally Posted by az3579

Diggin' the yellow fogs I put in. Put 'em to good use today...
Not sure if I'm going to transfer the X5 LED fog assemblies into my housings at this point yet...

https://c1.staticflickr.com/4/3945/3...4248de20_k.jpgIMG_20170301_072020 by botond.pal, on Flickr



Very foggy this morning!

https://c1.staticflickr.com/4/3925/3...e9489a63_k.jpgIMG_20170301_064821 by botond.pal, on Flickr

---

This was from last week on my way to work!
Attachment 29231


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by WOLFN8TR

Looks good BP. [emoji106]

Are your X5 LED fogs in the stock housing?

---

They're still in my stock housings. One of the housings is completely smashed; the lens shattered off when the fog light fell out and banged against the road. The internals with the X5 innards, however, are fine, so they can still be transplanted if I wanted to. The hard part (modifying the heat sinks) is done, I'd just have to shave some of the inside of the housings to get them to fit the new ones.

Quote:

---

Originally Posted by 704sw

+1 want to know. I'm retrofitting ES300/IS300 yellow fog projectors, and I'm curious about how you did it. I'm not looking forward to fabricating another set of brackets.

---

When we were retrofitting them, the heatsinks had to be cut and the inside of the fog housing has to be enlarged on the inside a bit for it to slide in.
They didn't sit quite horizontal, but it was close. Unfortunately I don't have the pics on my Flickr account; have to dig them up from wherever they are.

fogs look good BP. Why do people put X5 fog housings in?

Quote:

---

Originally Posted by johnrando

fogs look good BP. Why do people put X5 fog housings in?

---

Correct me if I'm wrong, but they're LED and have a similar form factor to most newer BMW fog housings. I know TRS had a great deal on them a year or two ago.

Quote:

---

Originally Posted by johnrando

fogs look good BP. Why do people put X5 fog housings in?

---

The housings are technically E46 housings, just with X5 LED internals installed. I did it because I'm a lighting whore... I love LED products. Halogen looks like meh to me and HIDs cause my dash lights to flicker whenever they get turned on (and are more complicated; ballasts). LEDs are the perfect solution. No ballasts, instant on/off, and have a nice high intensity output.

That setup looks great.

Quote:

---

Originally Posted by az3579

The housings are technically E46 housings, just with X5 LED internals installed. I did it because I'm a lighting whore... I love LED products. Halogen looks like meh to me and HIDs cause my dash lights to flicker whenever they get turned on (and are more complicated; ballasts). LEDs are the perfect solution. No ballasts, instant on/off, and have a nice high intensity output.

---

Yep, HID fogs are a bad idea. The corner light function will murder the ballasts and bulbs, and an over-illuminated foreground has a very negative impact on your ability to see at-distance in the dark. The X5 LEDs have a very wide beam pattern too, do they not?