The Random E46/ZHP Question Thread

Quote:

---

Originally Posted by Dual

I need info on the strips which run for-and-aft on the roof for mounting ski racks, Google cams, etc. One of mine just got blown completely off in a carwash.

What terms would I enter to search on this subject, please? I thought of "rail" but that's not working.

---

"Roof moulding" is what you're looking for. I don't think you can get just the flap/cover on its own, I think you have to get the whole assembly if you're buying new. I'd find your part number via RealOEM under:

Vehicle trim > Exterior Trim / Grill

I think you have a coupe, so the part numbers are:
Right: 51138208690
Left: 51138208689

Thanks! What I'm trying to do is replace all the clips on my roof molding. I picked it up at the carwash today, two days after the carwash stole it, and it seems to be in great shape (one tiny chip: that's it).

But I remember it being a bit less than tight on the car beforehand. With 'roof molding' in hand I can REALOEM or whatever.

Thanks again.

Quote:

---

Originally Posted by Dave1027

I had one fog lens get cracked from a rock I guess. I bought a new lens on ebay and replaced it. Cost was about $15.

---

Dave, can you post a link to the lens you bought?


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by roadbiker_2

Dave, can you post a link to the lens you bought?

---

I'm curious as well. It would be great to put this info in a thread in the Lighting forum vs. searching through the 410 pages of this one. Lighting forum:
http://www.zhpmafia.com/forums/forum...hp?53-Lighting

A member started a thread there on 3/14 asking about fog light part numbers - could save him some $$ and trouble:
http://www.zhpmafia.com/forums/showt...r-05-ZHP-Coupe

Question: is there any reason to believe a rear view mirror from a RHD car is any different than one from a LHD car? I know side mirrors are different between the two. I found a great deal on a Z4M mirror (please nobody steal it!) but it's from a RHD model.

Not sure but if it has homelink buttons on it perhaps they would be on the opposite side?

What's a good battery charger? Looking to install the shark this weekend, but I need a battery charger.

Looking at this:
https://www.amazon.com/Potek-Battery...KFR7NXQ1EPR631

Quote:

---

Originally Posted by Sockethead

Not sure but if it has homelink buttons on it perhaps they would be on the opposite side?

---

No Homelink, just the cool inverted trapezoid (which I think is a neat alternative to the M3/M5 oval). https://uploads.tapatalk-cdn.com/201...193ada3b8c.jpg

Quote:

---

Originally Posted by 704sw

No Homelink, just the cool inverted trapezoid (which I think is a neat alternative to the M3/M5 oval). https://uploads.tapatalk-cdn.com/201...193ada3b8c.jpg

---

I like that mirror

Sent from my SM-G935V using Tapatalk

Quote:

---

Originally Posted by TheFinanceGuy

What's a good battery charger? Looking to install the shark this weekend, but I need a battery charger. Looking at this:
https://www.amazon.com/Potek-Battery...KFR7NXQ1EPR631

---

From the Maintenance Section, a battery charger thread: http://www.zhpmafia.com/forums/showt...highlight=ctek