Capo
"Roof moulding" is what you're looking for. I don't think you can get just the flap/cover on its own, I think you have to get the whole assembly if you're buying new. I'd find your part number via RealOEM under:Originally Posted by Dual
Vehicle trim > Exterior Trim / Grill
I think you have a coupe, so the part numbers are:
Right: 51138208690
Left: 51138208689
Messaggero
Thanks! What I'm trying to do is replace all the clips on my roof molding. I picked it up at the carwash today, two days after the carwash stole it, and it seems to be in great shape (one tiny chip: that's it).
But I remember it being a bit less than tight on the car beforehand. With 'roof molding' in hand I can REALOEM or whatever.
Thanks again.
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Enforcer
Dave, can you post a link to the lens you bought?
Sent from my iPhone using Tapatalk
Messaggero
I'm curious as well. It would be great to put this info in a thread in the Lighting forum vs. searching through the 410 pages of this one. Lighting forum:
http://www.zhpmafia.com/forums/forum...hp?53-Lighting
A member started a thread there on 3/14 asking about fog light part numbers - could save him some $$ and trouble:
http://www.zhpmafia.com/forums/showt...r-05-ZHP-Coupe
2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats
Big Earner
Question: is there any reason to believe a rear view mirror from a RHD car is any different than one from a LHD car? I know side mirrors are different between the two. I found a great deal on a Z4M mirror (please nobody steal it!) but it's from a RHD model.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Campieri
Not sure but if it has homelink buttons on it perhaps they would be on the opposite side?
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Messaggero
What's a good battery charger? Looking to install the shark this weekend, but I need a battery charger.
Looking at this:
https://www.amazon.com/Potek-Battery...KFR7NXQ1EPR631
Patrick ///04 330i ZHP///BMWCCA#465139///Jim Conforti Shark Injector///H&R Touring Cup Kit///Gruppe M Intake
08 E70 X5 (sold) 86 Porsche 944 NA (sold) 99 540i TiAg (sold) 98 328i hellrot (sold) 96 318iC black (sold)
Big Earner
No Homelink, just the cool inverted trapezoid (which I think is a neat alternative to the M3/M5 oval).
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
I like that mirrorNo Homelink, just the cool inverted trapezoid (which I think is a neat alternative to the M3/M5 oval).
Sent from my SM-G935V using Tapatalk
Messaggero
From the Maintenance Section, a battery charger thread: http://www.zhpmafia.com/forums/showt...highlight=ctek
2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats
Posting Permissions
Reply With Quote
