Charlie's 2008 Porsche 997 turbo
https://uploads.tapatalk-cdn.com/201...57dd7f362e.jpg
The 997.1 steering wheel my speed sled came with was a nice steering wheel but I have been wanting to swap this for a newer 997.2 Sport Design Alcantara steering wheel so today I performed the swap. [emoji41]
https://uploads.tapatalk-cdn.com/201...a81368a959.jpg
https://uploads.tapatalk-cdn.com/201...f5917eabd9.jpg
I used a T-55 bit to remove my retaining screw...
https://uploads.tapatalk-cdn.com/201...bf2c6f84b9.jpg
With the new steering wheel in place (pictured above) I could see a more pronounced gap between the steering wheel and where the retaining screw goes in but that was not a problem...
https://uploads.tapatalk-cdn.com/201...35d0d174ad.jpg
The new steering wheel went on without any issue and I used the new screw (which came packaged with my new steering wheel) to secure it.
https://uploads.tapatalk-cdn.com/201...b30143a41c.jpg
https://uploads.tapatalk-cdn.com/201...e0fa5547fe.jpg
Got the airbag module connected and installed, then took off the protective wrap and took these two pictures...
https://uploads.tapatalk-cdn.com/201...64958e1739.jpg
https://uploads.tapatalk-cdn.com/201...9047bc2cbd.jpg
Now all three of my cars have alcantara steering wheels mounted in them [emoji41]
Sent from my iPhoneX using Tapatalk Pro