Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 7 of 7 FirstFirst ... 567
Results 61 to 66 of 66
  1. #61
    Join Date
    Apr 2012
    Location
    Waco, TX
    Posts
    76


    And the clutch video is up!

    Next up, Ground Control coilovers. I'll probably be cutting the strut towers to get the camber plates to fit

  2. #62
    Join Date
    Apr 2012
    Location
    Waco, TX
    Posts
    76
    Cut the strut towers to allow for maximum camber
    Attachment 39944

    This is static camber up in the air. It’s close to 5 degrees!
    Name:  IMG_1208.jpeg
Views: 268
Size:  106.8 KB

    However when down on the ground, the coil overs are slammed. It’s on 6” 500lb Eibach springs and GC Race plates. Struts came off an M3 with Koni inserts. I hate piecing together suspension, but it looks like I’m going to need a 1” spacer to get the ride height I want. The rear is still on stock springs. The Koni oval track rear shocks are longer than the original shocks, so I’m going to need helpers to keep those springs seated when I’m jack the car up. It also means the rear can’t be slammed to match the front. Way more work than I expected for a set of $500 coils.
    Name:  IMG_1209.jpeg
Views: 267
Size:  84.5 KB

    Name:  IMG_1210.jpeg
Views: 256
Size:  131.3 KB

  3. #63
    Join Date
    Apr 2012
    Location
    Waco, TX
    Posts
    76
    Did you buy the right car if you don't look back at it when walking away? I'm pretty happy with the progress of this car so far. Coilovers figured out and brakes installed for my track day on 9/9

    Name:  Screenshot 2023-09-05 170136.jpg
Views: 205
Size:  120.3 KB


  4. #64
    Join Date
    Apr 2012
    Location
    Waco, TX
    Posts
    76
    Took the ZHP to two track days and experienced why you don't buy used dampers. I shook it down at MSR Cresson and found out quickly the rear Konis were blown and I was hitting coil bind. Fixed that by installing the stock Sachs shocks back on and went to ECR. I'm still battling front droop issues as I've never had so much trouble trail braking. Luckily, no damage to the car or myself after these two days.




  5. #65
    Join Date
    Apr 2012
    Location
    Waco, TX
    Posts
    76
    Next step in ruining the ZHP, sunroof delete! I can’t wait to tear apart the rest of the interior after my next 2 track days.

    Name:  IMG_1297.jpeg
Views: 161
Size:  97.5 KB
    Name:  IMG_1299.jpeg
Views: 156
Size:  98.4 KB

  6. #66
    Join Date
    Apr 2012
    Location
    Waco, TX
    Posts
    76
    Welp this is the car now. I did a few tracks since the last update, then tore it apart. It’s reassembled now and ready for Willow Springs this week!

    Name:  IMG_1667.jpeg
Views: 57
Size:  225.2 KB

Page 7 of 7 FirstFirst ... 567

Similar Threads

  1. I Just Joined! I Need Some Opinions!
    By e46.matt in forum General -- ZHP Related
    Replies: 14
    Last Post: 07-05-2020, 03:27 PM
  2. Hey all, just joined.
    By kjgildersleeve in forum New Members (or older members who have not introduced themselves)
    Replies: 13
    Last Post: 06-02-2017, 08:00 AM
  3. Just joined
    By Raptorman5174 in forum New Members (or older members who have not introduced themselves)
    Replies: 29
    Last Post: 04-16-2013, 01:19 PM
  4. Just joined... will be keeping my eye out
    By brkf in forum New Members (or older members who have not introduced themselves)
    Replies: 17
    Last Post: 06-15-2011, 08:23 AM
  5. Joined the Club
    By Jon D in forum New Members (or older members who have not introduced themselves)
    Replies: 6
    Last Post: 11-22-2010, 08:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •