Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 10 of 10
  1. #1
    Join Date
    Jan 1970
    Posts
    15,433

    Harbor Freight Tools -- new affiliate advertiser

    Thanks for supporting the site, guys. When you shop at Harbor Freight Tools, the site gets a commission. It's much appreciated.



    Harbor Freight Link

  2. #2
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Yup....Just picked up that jack from Harbor Frieght last week. All aluminum 3 ton jack for $79.00 shipped. Normally $129.00 before shipping....
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  3. #3
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    A welcome addition to the site, Marcus!
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  4. #4
    Join Date
    Jan 1970
    Location
    Western WI
    Posts
    3,059
    Don't forget they often have great coupon codes every month that you can find in the back of magazines like Car & Driver, Motor Trend, etc.

  5. #5
    Join Date
    Jan 1970
    Location
    Asheville, NC
    Posts
    2,591
    Damn. I just spent $400 bucks there last month. oh well...
    "No, Donny, these men are nihilists, there's nothing to be afraid of"

    09 135i Msport 6mt
    04 330i ZHP (sold)
    David

  6. #6
    Join Date
    Jan 1970
    Posts
    15,433
    Also, when we were a smaller site, and had less traffic, harbor freight rejected our application. This time they approved us in 48 hours.


    iPad. Tapatalk. Bi-winning.

  7. #7
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Ahem!
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  8. #8
    Join Date
    Jan 1970
    Posts
    15,433
    Harbor Freight is having a sale if you need to buy something expensive.

    Dad's & Grad's special: save 20% off one item at Harbor Freight Tools. Use code SHOP20.

    Offer valid: 5/1/11 – 6/20/11

  9. #9
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Sweet..............Thanks Marky.
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  10. #10
    Join Date
    May 2011
    Location
    Charleston SC
    Posts
    6,149
    They have really good prices on stuff that you really need to do a job on your car but you know you'll only use a couple of times.. for example, got a ball joint spitter there for the tie rod end. They have the type that doesn't ruin the boot like a pickle fork does. It was dirt cheap!
    Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
    M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
    H&R sport springs,
    UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
    Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers

Similar Threads

  1. Nitrile Gloves available at Harbor Freight Tools
    By billschusteriv in forum Product and Storefront Reviews
    Replies: 21
    Last Post: 05-04-2011, 05:42 PM
  2. eBay is a new affiliate advertiser
    By Marcus-SanDiego in forum Minutiae
    Replies: 10
    Last Post: 03-01-2011, 09:29 AM
  3. New Affiliate Advertiser -- Expedia
    By Marcus-SanDiego in forum Minutiae
    Replies: 0
    Last Post: 02-23-2011, 10:32 PM
  4. Allstate Insurance is now an Affiliate Advertiser
    By Marcus-SanDiego in forum Minutiae
    Replies: 1
    Last Post: 02-14-2011, 08:34 AM
  5. Walmart.com is our newest affiliate advertiser
    By Marcus-SanDiego in forum Minutiae
    Replies: 0
    Last Post: 01-30-2011, 12:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •