Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 3 123 LastLast
Results 1 to 10 of 27
  1. #1
    Join Date
    Jan 1970
    Location
    Tampa, FL
    Posts
    709

    BMW Performance intake installed on my BMW 330i ZHP

    Only 2 bolts, this took about 20 minutes to swap out. I had a problem getting the intake tube on the back of the new box (it was tight), so I lubed up the gasket slightly and that was enough to clip it on there. I took it for a spin and while I don't notice any performance difference, it sounds slightly different - a tiny bit more aggressive. How's it look:








  2. #2
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    I hope you didn't expect any performance increase. Whether "cold" air intakes actually do anything for Bimmers is severely questionable, but I will tell you one thing. With the cone air filter on the E30 S50, it sounded downright MEAN! Doing it for the sound alone is worth it, depending on how much different it sounds on your car.

    Do you have any sound clips? In-car?
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  3. #3
    Join Date
    Jan 1970
    Location
    Tampa, FL
    Posts
    709
    No clips yet, but I could go make a movie of it. It says 3hp gain! I didn't expect to notice it though, just affirming for those interesting in this intake.

  4. #4
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    You'd be hard pressed to even notice 3hp, even if it did add that much.
    As long as you're happy with the sound and the look, that's all that matters!

    What kind of air filter element does it use?
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  5. #5
    Join Date
    Jan 1970
    Location
    Ocean County, NJ
    Posts
    7,273
    Looks good. This is on my list as well.
    -Be yourself; everyone else is already taken.
    ZHP Pre-Ride Briefing

    2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
    Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded

  6. #6
    Join Date
    Jan 1970
    Location
    Tampa, FL
    Posts
    709
    It's pretty weird, not quite a cone filter, but not quite a box filter either. Think box filter horseshoe shaped coming down from the top of the box. I'll see if I can find a picture, if not I'll open it tomorrow for one.

  7. #7
    Join Date
    Jan 1970
    Posts
    15,433
    I have this intake as well. I did not expect any HP gain at all. I got it strictly for the looks. Nothing more.

    It does look good, though.

  8. #8
    Join Date
    Jan 1970
    Location
    Tampa, FL
    Posts
    709
    It looks very clean and like it belongs there. Like stock with some additional style.

  9. #9
    Join Date
    Jan 1970
    Location
    Tampa, FL
    Posts
    709
    Here are the stock pictures of the filter, this is exactly how it looked: http://www.ecstuning.com/BMW-E46-330...ntake/ES35341/

  10. #10
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    So that's just a bent stock filter? I like eeeet.
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

Page 1 of 3 123 LastLast

Similar Threads

  1. BMW Performance Intake
    By GMATT in forum Performance
    Replies: 141
    Last Post: 06-03-2012, 10:51 AM
  2. BMW Performance Intake
    By Mtnman in forum Product and Storefront Reviews
    Replies: 8
    Last Post: 07-28-2011, 11:40 PM
  3. Just got my BMW Performance muffler installed
    By norman@southbayBMW in forum Performance
    Replies: 2
    Last Post: 05-13-2011, 09:14 AM
  4. BMW Performance Intake on sale
    By Tampa330i in forum General -- ZHP Related
    Replies: 17
    Last Post: 04-12-2011, 06:26 AM
  5. Bmw performance intake
    By Mtnman in forum Performance
    Replies: 48
    Last Post: 02-03-2011, 01:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •