Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1

    Cool BMW V8 coffee table+Rockford Fosgate 12 inch clock with RF Sub Box











    WILL NOT SHIP. Pickup only. However if you are coming from a great distance i can try to help u the best i can.

    The clock was made from a Rockford Fosgate slim punch 12 inch subwoofer. The clock works great and the face of the clock is actually the sub that came with the box. The bezel was the tricky part because i had to scour the stores to find a brushed aluminum finish that would fit around the face of the clock AND the outer "punch" bezel that was originally around the sub.

    The engine coffee table came out of a 540i sport and as u can see is only the block, crank, 8x pistons, and the dual mass flywheel. The table will come with those awesome coasters as i know how it can be with a glass table top. I have a carbon fiber section on the right lower corner i use as a stationary mousepad for my pc>tv set-up. It's just a square cut out of cf vinyl so it is not permanent and can be removed if requested. When I got it, it was filthy and the process of cleaning the build up was a long process. I know its easier to just spray over it but because it is an inside the home item i wanted it to be as clean as possible before prime and paint. The 4 pistons that are not holding the glass up are in the block connected to the crank. I made sure there was not too much overspray so the pistons could move up and down with minimal effort.

    If you have any questions or comments please feel free to pm me.

    Long shot here but if you are a Volkswagen fan, I have a round end table made from 2x brand new 2012 Jetta GLI wheels. I also have a similar, larger round end table made out of 2x BBS Miro LM Replica 19 inch wheels as well but are not pictured. I can take pictures of them as soon as I receive the glass.
    I have no idea what the price should be set at for any of these items. They were originally made for myself with no intent on selling them. I will consider reasonable offers and be as fair for each item as i can. Thanks for looking.

  2. #2
    Join Date
    Apr 2011
    Location
    Dallas
    Posts
    822
    Sorry if I missed it but...you are where?

  3. #3
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Zactly. He usually posts F/S threads then heads out.
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  4. #4
    Join Date
    Jun 2012
    Location
    Jonesborough, TN
    Posts
    1,286
    Quote Originally Posted by aurelius View Post
    Sorry if I missed it but...you are where?
    +1

    Sent from my DROID BIONIC using Tapatalk 2

    '01 330i

  5. #5
    Join Date
    Apr 2011
    Location
    Dallas
    Posts
    822
    Location field should be mandatory upon site registration.

  6. #6
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Agree.
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  7. #7
    Join Date
    Jan 1970
    Location
    32.8 N, 117.3 W
    Posts
    7,640
    how much for the table?

  8. #8
    Oops sorry guys. Columbia maryland is the location.

  9. #9
    Quote Originally Posted by danewilson77 View Post
    Zactly. He usually posts F/S threads then heads out.
    Whats that supposed to mean?

  10. #10
    Quote Originally Posted by Hermes View Post
    how much for the table?
    Im not sure really. Since i dont know the market value of the items im gonna sell it to the highest offer.

Page 1 of 2 12 LastLast

Similar Threads

  1. (SOLD) OEM 18 inch wheels Off 135i coupe staggered
    By jamezc88 in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 34
    Last Post: 03-12-2013, 06:52 PM
  2. Clock dont work
    By Dathaeus in forum Mechanical | Troubleshooting
    Replies: 12
    Last Post: 03-11-2013, 02:30 PM
  3. Charlie Trotter's Kitchen Table
    By UdubBadger in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 16
    Last Post: 06-21-2012, 05:15 PM
  4. How do I change the time on the clock?!
    By antcamp in forum General -- ZHP Related
    Replies: 14
    Last Post: 11-14-2011, 06:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •