You have a tracking for me?
I paid already
Thanks
Soldier
You have a tracking for me?
I paid already
Thanks
Messaggero
Ok where are some instructions for Win XP (SP3)? have PM'd Toni and got a folder which contains drivers etc but I am at a loss still on how to proceed.
Do I still need the CD that came with the coding dongle?
Can someone who has installed this software using WINDOWS XP (SERVICE PACK 3) please chime in?
Thanks in advance.
2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster
Consigliere
Wish I could help. You can ask BP likely
GoingHAM mobile
Call me Seth
CURRENT: 2016 Long Beach Blue BMW /// M2
RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
'04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon
Originally Posted by danewilson77
Boss
I think there are instructions. The CD contains the drivers for the device. Usually 2 ways, either install the drivers then connect the device, or some connect the device, then the system ask for the drivers, and you then point to the CD directory with them. I think this install is the latter. Tony was great with tech support, so I'm sure when he's available he'll help out.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Messaggero
Guess this is the way to go ??
(I guess after the initial program installation, dude must be plugging in the dongle, which is NOT shown, and then goes back and loads drivers?)
All this I am assuming, can be done withOUT plugging anything into the car with Win XP?
2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster
Consigliere
Got mine, thanks.
Says drivers are installed but when I plug it into the car it won't go from yellow to green telling me the scanner is plugged in. Wtf?
GoingHAM mobile
Call me Seth
CURRENT: 2016 Long Beach Blue BMW /// M2
RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
'04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon
Enforcer
Got mine also, have not plugged it in, going to connect it on Friday.
Any good ideas on "must have" coding options?
Capo
I took a look around the first post in this thread. Tony lists a lot of good things (convenience unlock, turn on/off DRLs, recoding the temp gauge to be more accurate, etc).
Messaggero
Is this with Win XP or Win 7?
Sent from my NOT bent iPhone 6 using Tapatalk
2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster
Consigliere
I got my pa soft to work with windows 7 using the guide posted on e46fa Natick.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Posting Permissions
Reply With Quote
