Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 343 of 1008 FirstFirst ... 243293333341342343344345353393443843 ... LastLast
Results 3,421 to 3,430 of 10072
  1. #3421
    Join Date
    Jan 1970
    Location
    32.8 N, 117.3 W
    Posts
    7,640
    Quote Originally Posted by MrMaico View Post
    It just installs with some 3M double sided tape so I think it will be alright once I glue it down tight. Or if I have to I could just screw it down too.
    Wait a minute... double sided tape? I would not trust that on the pedals (dead pedal would be fine). I would definitely use screws on the brake pedal at a minimum

  2. #3422
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    Today, Wobbie received fresh engine oil and filter, fresh tranny and diff fluid.

    Also paid Charlie the Master Electronic Technician a visit and had him perform his usual super professional angel eye harness replacement. I had one, but it was slightly dysfunctional, so I had him install a new harness. This man is a pure electronics genius and his craftsmanship is absolutely top notch.

    For reference, I know how to do the install and am capable of doing it myself. I had Charlie do it because he knows how to do it right. Freakin' genius.

    We did all that to make my city lights work. Gorgeous, they are. Coupled with my yellow high beam bowls, they look spectacular in person. My phone pics don't do the lights justice.



    You can find more pics in Wobbie's project thread. I learned a couple of things from Charlie and sure am glad to know him.


    Sent from my iPhone 4S from Tapatalk
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  3. #3423
    nike001 Guest
    Got one FX-R projector in, but the auto-leveling isn't working. I can hear the motor going but it's not moving the headlight. So I gotta figure that out.

    Started on the other side using the dremel to get enough room to put the projector in, and I think I cut too much. I only have 1 mounting point right now, maybe moving it up more will at least give me two. Or if anyone has a spare ZKW headlight bracket, I may be interested in taking it off your hands.

  4. #3424
    Quote Originally Posted by nike001 View Post
    Got one FX-R projector in, but the auto-leveling isn't working. I can hear the motor going but it's not moving the headlight. So I gotta figure that out.

    Started on the other side using the dremel to get enough room to put the projector in, and I think I cut too much. I only have 1 mounting point right now, maybe moving it up more will at least give me two. Or if anyone has a spare ZKW headlight bracket, I may be interested in taking it off your hands.
    Nike, props to you for taking this on....I have a set of FX-Rs at my house but wasn't brave enough to attempt this. Too much cutting, which is why I did the ///M3 projector retrofit instead. Pm me I might be able to help you....


    @ BP, you are too kind my friend It was a pleasure to help a brutha out

  5. #3425
    nike001 Guest
    PM'ed

    Does anyone know if AL frames fit in ZKW housings?

  6. #3426
    Join Date
    Mar 2011
    Location
    West Palm
    Posts
    428
    Gave my bmw a well deserved wash and Lucas fuel injector cleaner along with a full tank of gas
    THE ANGRY TOMATO

  7. #3427
    Quote Originally Posted by nike001 View Post
    PM'ed

    Does anyone know if AL frames fit in ZKW housings?
    I have OEM M3 frames and they are made by AL. You have to do very slight modifications as shown in my projector retrofit DIY...

  8. #3428
    Join Date
    Jul 2011
    Location
    St. Louis, MO
    Posts
    34
    I gave my ZHP a hand wash as we're finally seeing the sun and 40+ degrees here in St. Louis. Man she looks good all clean!
    '03 Imola Red ZHP 6MT sedan | black leather, silver cube | E46 M3 front strut bar

  9. #3429
    Join Date
    Jan 1970
    Location
    Ocean County, NJ
    Posts
    7,277
    Good deal. Heading out to do my own 40 degree hand wash in a bit.
    -Be yourself; everyone else is already taken.
    ZHP Pre-Ride Briefing

    2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
    Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded

  10. #3430
    Join Date
    Mar 2011
    Location
    Asheville, NC
    Posts
    3,240
    Quote Originally Posted by danewilson77 View Post
    Thanks for the review Ryan. Would be interested in seeing this in the Product review subforum. You game? It surely will be lost in the "What did you do for your ZHP/BMW" thread.
    I'll write a review. Oh how I love eating crow. I was the E60 M5's #1 fan, now, well.........

    Quote Originally Posted by cakM3 View Post
    Ryan,

    You should test drive an E46 M3 Just took my ///M out for a quick drive after leaving it in the garage for a week and a half....love the car I think my next ///M will be an E60 M5
    The e46 M3 is exactly what I need to drive. Only thing, I love 4 doors. I've run some different numbers and maybe even the e90 335i might be right for me.

    Quote Originally Posted by nike001 View Post
    Good read! I completely agree with you. The M5's are horrible monsters just waiting to be let out of the closet. I've only driven a couple, but no chances to really sling them around. Your post is exactly why I love my ZHP. I feel comfortable putting it through the gears without breaking the law in ~2 seconds.

    IIRC, the 535 is/does/will come in a dual clutch, no? I could have sworn I drove one w/ a Dual Clutch
    I know the 535 doesn't come with one right now. It is available with a sport automatic which is a 8speed "short throw" which I have heard is a big difference, not the 7speed dual clutch like the 135, and 335. I like the size of a 5series, but the sportiness needs to be there too.

    Please visit my build page here, on CarDomain.

Page 343 of 1008 FirstFirst ... 243293333341342343344345353393443843 ... LastLast

Similar Threads

  1. Got a few shots of her today
    By static667 in forum ZHP Gallery and Video Section
    Replies: 10
    Last Post: 05-01-2011, 09:16 AM
  2. I learned something today...
    By otto99 in forum General -- ZHP Related
    Replies: 3
    Last Post: 03-29-2011, 09:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •