noted in my adventures today that the connector for the C-pillar lights looks the same as that UGDO connector.
why do you want your airbag light on?
noted in my adventures today that the connector for the C-pillar lights looks the same as that UGDO connector.
why do you want your airbag light on?
Got my plates![]()
![]()
^Nice!
-Be yourself; everyone else is already taken.
ZHP Pre-Ride Briefing
2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded
Thank you! I knew you'd appreciate the shore plates.
Today I found the car in which I will model mine after:
![]()
Call me Seth
CURRENT: 2016 Long Beach Blue BMW /// M2
RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
'04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon
washed, clayed, and waxed the car... I am beginning to think that my neighbors think I have a problem....
Mods: Smoked corners, smoked side markers, smoked tails, 35% tint, CF kidney grills, debadged, angel eyes, 3000k HID Fogs, OBX exhaust, Sharked, solo werks S1 coilovers, front and rear strut brace, AUX cable
"I'd rather lose by a mile because I built my own car, than win by an inch because someone built it for me"
Freakin perfect!
-Be yourself; everyone else is already taken.
ZHP Pre-Ride Briefing
2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded
Wish my wheels--and whole car--looked that clean! And assuming your ride height is stock, it gives me an idea of how much I lowered my car. Because I don't have "before" ride height measurements, only "after" ones.
Last night I changed my oil and discovered a broken oil plug ;-(. I blame Jiffy Lube, the last ones to torque that bolt! Luckily, I had both some broken bolt extractors and a new magnetic drain plug from UUC that I was planning to put in.