Originally Posted by az3579
Consigliere
Call me Seth
CURRENT: 2016 Long Beach Blue BMW /// M2
RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
'04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon
Messaggero
I haven't had mine apart yet but I'd think this stuff would be like the oem stuff. We have some at work and it feels like it would work great and be easier to remove than silicone if you have to take it apart again in the future.
http://www.amazon.com/3M-08578-Black...6516222&sr=8-1
Enforcer
That was so 15 seconds ago.
Enforcer
I took mine to Bill Arnold (divine?) for a once over (Insp II @ 57K) and committed to buying Webster's Noah cover.
1971 2002 - 1980 528i - 1986 535is
2002 M5 - 2006 330ci - 2006 X3 M-Sport 6MT
Sort of gave my ZHP to my wife, which enabled me to buy an e39 M5. I won, twice.
Messaggero
I will be taking my ZHP to JMK BMW tonight for their Customer Appreciation Day (free car inspection) and hopefully the tail light recall...
of course, i will TRY to DIY if they find anything thats wrong on my car...
"Lapit mga kaibigan at makinig kayo, ako'y may dala-dalang balita galing sa bayan ko
Nais kong ipamahagi ang mga kwento at mga pangyayaring nagaganap sa lupang ipinangako..."
Had intentions on fixing my VANOS stud, but that went awry. The stud threads into the head.. but when Terra and I tried to torque it (only 8 ft-lbs) the nut would just pull the stud out. Red Loctite didn't even work. Worked probably about 5 hours today; took the VCG and VANOS off to get to the hole..
But we also drained my oil.. Now to remember to put oil back in it before I start it back up. I guess I'll be taking my moms car to work tomorrow
Messaggero
Hah, neat. I wonder if all dealers do that
2005 BMW 330i ZHP 6MT. Built 11-19-04. Bought 4-2012.
Stock: Nav, leather, PDC, Xenon
Added by me: OEM Alarm, OEM heated seats, OEM aux kit, OEM Bluetooth, intravee, M3 strut brace, BMW Performance Intake, Nappa leather arm rest, updated LCM (triple blink, euro hazards, trifecta lighting, 3 stage brakes), temp gauge
Last night I gave the car a much needed bath.
Messaggero
Free gifts from JMK BMW...
Inspection came back with few items needed:
- perform fuel injector service
- replace left lower ball joint
- replace thrust arm bushing
- and the OFHG
Hopefully the shimmy i feel will be gone after replacing the thrust arm bushing...
I can probably do the OFHG, not sure about 2 & 3.... is #1 really necessary?
and lastly, i bought a performance exhaust....
"Lapit mga kaibigan at makinig kayo, ako'y may dala-dalang balita galing sa bayan ko
Nais kong ipamahagi ang mga kwento at mga pangyayaring nagaganap sa lupang ipinangako..."
Big Earner
First, dang those are nice gifts!
Second, like how you nonchalantly expressed you got a performance exhaust. Sweet can't wait to hear it.
Posting Permissions
