Big Earner
Nice pick up.Originally Posted by cakM3
Just sourced a first aid kit from Stuart and I will be installing one in the ///M over the next few weeks
Another nice touch added to my ///M
They were kinda a pain to install because none of the online DIY's had the correct info.
I will try and do a write up on it this weekend for everyone.
Sent from my DROID RAZR using Tapatalk 2
2005 IR ZHP Alcantara 6MT l Bimmian phone mount l Khoalty Angel Eye's l Khoalty Fog's l AFE Stage 1 Intake l AFE Dynamic Air Scoop's l CDV Delete
Besian Sealed VANOS l Flat black Kidney Grills l Magnaflow Cat-Back
Capo
That would be awesome Devlin as I will need some guidance. I was planning to remove the 4 bolts that retain the seats so I could prop them up a little to mount these...
Boss
That would be good. I installed mine but they seem to be just slightly forward of where they should be sitting.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Capo
I also installed carbon fiber seat back covers in the ///M but "failed" to put pictures in this thread. Tomorrow should be a nice day so I will grab my Nikon and take a few pics and post them in this thread. Time to take the ///M out for a nice ride!
Here they are before I installed them...
Enforcer
^ 0o0o0o0oo0o0o0o
My eyes just fell outta my head and rolled on the floor. What CF parts DONT they have for our cars haha.
Current Ride: '13 R56 Mini Cooper S Hardtop - Ice Blue - Manual
RIP Berenger 7/13/15 189,963k
'03 4dr ZHP - Jet Black
ST V1 Coilovers | Beyern Wheels 18x9F 18x9.5R | Redline Goods Interior | Umnitza Halos | UUC Short Shift Kit | Stage 2 Clutch | Lightweight Flywheel | BMW Performance Intake | Pioneer 2-Din Carplay HU | Bav Sound Speaker Upgrade | Illuminated ZHP Shift Knob | LED Interior Conversion | Poly Bushings All Around | CF Splitters | CF Roof Spoiler | Projector Fogs
Capo di tutti capi
Actually....Charlie has a box full of fairies that fart carbon fiber dust all over his car.
Sent from Williamsburg, VA USA
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Big Earner
I knew it!!!!!!
Sent from my iPhone using Tapatalk
Capo
Yes I do Dane!
And fixed
Enforcer
It makes so much more sense now!Yes I do Dane!
And fixed
Current Ride: '13 R56 Mini Cooper S Hardtop - Ice Blue - Manual
RIP Berenger 7/13/15 189,963k
'03 4dr ZHP - Jet Black
ST V1 Coilovers | Beyern Wheels 18x9F 18x9.5R | Redline Goods Interior | Umnitza Halos | UUC Short Shift Kit | Stage 2 Clutch | Lightweight Flywheel | BMW Performance Intake | Pioneer 2-Din Carplay HU | Bav Sound Speaker Upgrade | Illuminated ZHP Shift Knob | LED Interior Conversion | Poly Bushings All Around | CF Splitters | CF Roof Spoiler | Projector Fogs
Capo
It was 65 degrees up here today so I took the ///M down to Newport for some pics using my Nikon D5100Figured it was a good time to run the ///M before putting it away in hibernation...enjoy!
The Scorza CSL bootlid shown in the few pics below has been replaced with an OEM CSL bootlid. The Scorza bootlid is now mounted to Sean's TiAg ///M
The CSL bootlid
The carbon fiber seat back covers - courtesy of the carbon fiber fairy
My BMW Performance Carbon Fiber strut bar
close up of the S54 throttle bodies and fuel rail
I had fun using my camera to take these pics but realize that I have a long way to go to really step up my picture taking game.....
Last edited by cakM3; 05-15-2015 at 03:46 AM.
Posting Permissions
Reply With Quote
