I'll replace everything but the radiator and perhaps pulleys... I've got a good excuse to do everything now.
Messaggero
I'll replace everything but the radiator and perhaps pulleys... I've got a good excuse to do everything now.
Capo di tutti capi
Perfect.Originally Posted by BavarianZHP
Sent from Williamsburg, VA USA
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Messaggero
One last question:
OEM or just go for the aftermarket parts? There's a significant price difference:
OEM:
http://www.ecstuning.com/BMW-E46-330...ling/ES263517/
Aftermarket:
http://www.ecstuning.com/BMW-E46-330...ing/ES2063861/
Capo di tutti capi
I think aftermarket is fine. I have that second kit on my car now, with a Behr radiator.
Sent from Williamsburg, VA USA
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Messaggero
Hmmm. I noticed that my "low coolant" light indicator didn't come on - I guess there may be some sort of failure there as well. I need to get a code reader! haha.
Capo di tutti capi
Code reader isn't going to help you with that.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Campieri
I may have a reman WP available soon (aka once I get around to installing my Stewart), less than 5k miles on it
It does... unless you are adding the same exact stuff, ALWAYS top off with pure distilled water. Water is what actually does the cooling, the "coolant" is only to adjust boiling/freezing (mainly freezing) temperatures
Messaggero
Yep, I only meant in a general sense. I think I'm going to get everything pressure tested as well.
Capo di tutti capi
Yeah... Def good to have if you're gonna start going down the diy trail.
Sent from Williamsburg, VA USA
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Posting Permissions
Reply With Quote
