Charlie's ///M Project Thread

[cakM3]

Finished my new mirror wiring harness today. For those who will do this (using Status Gruppe's carbon fiber door inserts), you got to measure 4 separate wires to 107" in length. This will be of sufficient length to splice into the existing wiring extending the range to allow you to reposition the mirror switch over to the CSL center console







Now one more wiring harness to make for a good friend


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[BCS_ZHP]

^ Charlie, really couldn't you just make it an even 9' and find somewhere to tuck that extra inch???

Haha, think there's a funny in there somewhere

[danewilson77]

^ Charlie, really couldn't you just make it an even 9' and find somewhere to tuck that extra inch???

Haha, think there's a funny in there somewhere

Sent from my SCH-I545 using Tapatalk

[cakM3]

^ Charlie, really couldn't you just make it an even 9' and find somewhere to tuck that extra inch???

Haha, think there's a funny in there somewhere

Sent from my SCH-I545 using Tapatalk

My thoughts exactly DW

Bruce, I wasn't thinking about making the extra inch to make the length 9' at the time I did this and I know you're busting on me

I can say that this is more labor intensive than I had initially planned but in the end I will be extremely pleased I went the extra mile to do this proper. If the planets align properly I'm hoping to have heated black leather w/ carbon backshell Recaro Sportster CS seats mounted in the ///M by my birthday

[CERF04ZHP]

Charlie - been a while since we caught up. I love what you have been doing/are doing/will be doing to your ///M. Can't wait to see it in the spring!

Sent from my EVO using Tapatalk

[cakM3]

Charlie - been a while since we caught up. I love what you have been doing/are doing/will be doing to your ///M. Can't wait to see it in the spring!

Sent from my EVO using Tapatalk

Yeah, I agree Channing! I will be coming up to the Boston area in a few weeks to pick up a set of headlight assemblies for the ZHP....if you want me to come by, just let me know

I have been reflecting over the past weekend how my ///M looked....

This is how I started my journey with my ///M...






and I have to say I was excited back then to have her....but the ///M I have today is no way near what she looked like at the beginning....talking about evolution....and I'm still going at it










The grey interior the ///M came with is now gone with exception of the rear deck, which will be taken care of very soon....door cards have been replaced with a more rare CSL door cards and I'm about to change out my Scorza CSL bootlid for an OEM CSL bootlid. So many changes occuring for my ///M. Soon I will be upgrading the brakes to ZCP brakes as an interm until I get the necessary funds lined up again for the StopTech Trophy series BBKs I continue to over... I'm also looking to get a set of black leather heated carbon backshell Recaro Sportster CS seats in time for my birthday to install in the ///M this year.....so yeah, I have lots planned and it should be fun

I'm not sure exactly how to say this but if I'm not modding either the ///M or my ZHP then I'm not happy.....I have an "addiction issue" I think

[ELCID86]

She's a beauty. Keep it up!

[cakM3]

Thanks Shawn! I got attacked by a swarm of mod bugs Having a blast modding both cars, that's for sure!

[cakM3]

Today I finished routing my mirror wire extension inside the ///M. Still lots of work needed to route this wiring harness. Got the part exposed between the cabin and door weatherproofed and waiting for it to dry.



In the pictures above, you can see where the wiring harness comes out of the cabin. Once I get the wiring harness into the door, I can complete the splicing and button everything up.


What you see in the above picture is where I'm looking to run my wiring harness


The new dash installed in the ///M. I'm loving the new look in my TiAg ///M!

[ELCID86]

Nice progress.


Thumbs, iPhone, Tapatalk.