RoflOriginally Posted by UdubBadger
Big Earner
Rofl
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Capo di tutti capi
You're crazy Seth.
The friendliest forum on the planet.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Messaggero
LOL
Alex - '16 Melbourne Red 328d Touring
M Sport + M Performance Package
iDrive 6 retrofit, Tunezilla Stage 2
Gone, but not forgotten: '03 Imola Red 330i ZHP - 6MT
Enforcer
Anybody have any tips on removing the dome light housing on the C pillars? Supposedly you just pry along the forward edge, but I'm concerned about the amount of force I'm having to apply.
__________________________________________________
2008 128i ZSP Sedonarot
---
2004 330i ZHP Imolarot
Conforti Shark Injector - Installation Pending!
AFE Magnum FORCE Stage 1 PRO 5R Intake
ECS Tuning Strut Bar
ECS Tuning Magnetic Drain Plug
German Auto Solutions DISA Gold Valve
CDV Delete
BSW and Polk Drivers
Ziza LED Interior Kit
Khoalty CREE LED Reverse Lights
BMW strut tower reinforcement plates
Messaggero
I Have a video of me doing it on YouTube. It's in my diy thread in e46f somewhere lol. But you want to apply more force than you think. It may bend the 2 metal tabs, but that's fine.I Think all the fits are based off mines or something.
Capo
What's this?
Thumbs, iPhone, Tapatalk.
Campieri
I think its a road noise sensor. Goes into your lower fender liner.What's this?
Thumbs, iPhone, Tapatalk.
Sent from my SM-G900T using Tapatalk
2004 E46 Imola Red 330i ZHP2008 E90 Sparkling Graphite M32011 E70 Black Sapphire X5 35d
Capo
That is where it mounts. I had to replace the part of the wheel well as it got damaged by road debris. I thought maybe it was hooked to the xenons or something. Does it work with the stereo?
Thumbs, iPhone, Tapatalk.
Big Earner
There's a road noise sensor?
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Campieri
Yup. What it does is adjust the loudness of the sound system with response to road conditions. So, if you are going 80mph on a crappy freeway and then you hit a perfectly paved offrampat 35mph, obviously your sound system will be too loud. So it quiets it down, and vice versa.
Yup.
2004 E46 Imola Red 330i ZHP2008 E90 Sparkling Graphite M32011 E70 Black Sapphire X5 35d
Posting Permissions
Reply With Quote
