I don't think so. I thought seat belts and other stuff played into this as well. I could be wrong.
The friendliest forum on the planet.
I don't think so. I thought seat belts and other stuff played into this as well. I could be wrong.
The friendliest forum on the planet.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
A guy I who contacted me from e46f said he put them in as a test and they worked. He said one of the mods there did a DIY write up. I need to search some more. I saw another guy who put M3 seats on a sedan also.
Thumbs, iPhone, Tapatalk.
Ok. Cool.
The friendliest forum on the planet!
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Here is another thread: http://forum.e46fanatics.com/showthr...light=m3+seats
He does mention "If going into a sedan you only have to swap the rail with the seatbelt anchor (outboard) - it's only got 2 nuts holding it in place so that's a piece of cake."
and "Sedan seatbelt bases attach to the seat rail. Coupe (including M3) seatbelt bases attach to the car floor. That's why you have to swap rails, for the seatbelts to mount.
edit: The B-pillar trim is the other part of the car that the seatbelt mounts to. Then it triangulates at the buckle."
SO I may be in luck.
Aren't coupe rear sets set up only as 2 seats instead of the "3" a sedan has? Probably not a big issue, though.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
2004 ZHP Sedan | Jet Black : Natural Brown : 6MT : OEM Navi : TRS Xenon retrofit : Khoalty Angel Eyes : Homelink retrofit : BMW Performance Intake|SSK : BC Coilovers : Z4M FCABs and RTABs : StopTech Cross-Drilled Rotors : Motorsport Hardware Stud Kit and 12mm Spacers : Kinesis K28
2004 B6 A4 Ultrasport Arctic White : Black : 1.8T : Quattro : 6MT
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM