Finally fixed my sunroof shade sliders. First time it's worked correctly in years.
Wiseguy
Finally fixed my sunroof shade sliders. First time it's worked correctly in years.
Dinan; Hign Flow Intake System, & Strut Tower Brace
Turner Motorsports; Underdrive Power Pulleys
Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
Stewart High Performance Water Pump
Hawk High Performance Street 5.0 Brake Pads
Brembo Rotor
The purposeful face of a formidable athlete:
The spine-tingling 330i Performance Package.
Purchased CPO on 12/23/2006 with 28,090 miles
Capo
I took off my front bumper on the ///M so I could take off the old lip spoiler in preparation for my new one, and adjust for an even gap when reinstalling the front bumper. I noticed a few styrofoam pieces missing so I managed to get new ones to reapply onto my kevlar bumper support. Once everything was secured, I reinstalled my bumper for a perfect fit.
Interesting that "facelift" ///Ms have the kevlar bumper support....
Last edited by cakM3; 08-17-2014 at 09:48 AM. Reason: needed to add this pic to show just what I had done...
Capo
Originally Posted by 3ZHPGUY
Finally fixed my sunroof shade sliders. First time it's worked correctly in years.
Nice job. Wes... ;-)
Enforcer
Began restoring a lip on one of my Kinesis K28's. Turned out really well. Fingers are killing me though!
Before
320 grit
400 grit
600 grit
Fingers hurt too much to take photos of the other steps so here are the final after polishing
2004 ZHP Sedan | Jet Black : Natural Brown : 6MT : OEM Navi : TRS Xenon retrofit : Khoalty Angel Eyes : Homelink retrofit : BMW Performance Intake|SSK : BC Coilovers : Z4M FCABs and RTABs : StopTech Cross-Drilled Rotors : Motorsport Hardware Stud Kit and 12mm Spacers : Kinesis K28
2004 B6 A4 Ultrasport Arctic White : Black : 1.8T : Quattro : 6MT
Messaggero
That came out nice for hand work. To get great shine you would do best with machine for speed and consistency.
- Stuart
/_________\
OO=[][]=OO
Messaggero
Installed new (proper length) speedo cable and new (also proper length) parking brake cables.
Bought sheet metal to cover all the previous holes in rear parcel shelf from years of different speaker install's - plan to weld in tomorrow and run a thick line of body seam sealer
Trying to stop exhaust fumes from getting into the cabin
and installed the BBS RSs
test fitting the RSs on Anna's MINI - too much tire
- Stuart
/_________\
OO=[][]=OO
Big Earner
I'm thinking Anna's car looks badassery like that...
Bruce
21 GMC Sierra - mine
16 X5 M-Sport - wife
11 M3 - 1st son
04 Tundra - 2nd son
17 X1 M-Sport - daughter
Former (mo/yr sold):
15 335xi M-Sport (8/18)
11 335is (8/17)
11 X5 AW/blk (11/15)
04 330xi blk/gray (7/15)
06 ZHP SGM/blk (6/15)
08 335xi blue/blk (4/15)
04 ZHPci MB/blk (2/14)
04 ZHPcic IR/Alc (10/13)
01 540iT anthra/blk (7/13)
04 ZHPci TIAG/blk (9/12)
03 540i M-Sport (9/12)
01 325ci (3/12)
02 325iT 5MT (10/11)
05 ZHPci (7/11)
03 330cic (2/11)
00 323ci (10/10)
Capo
Those RS' look amazing on the '02, Stuart. The Mini... not so period correct.
So are you busting out your welding skills again? Hopefully you pick it right up again.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Capo
+1
Capo
Ripped off the sagging material from my A-pillar on the passenger side. Already did this on the rears, just three pillars left (driver's A-pillar and both B-pillars). I will do these when they completely detach like the others did...
Honestly, you can't really tell that much that the material is off. From the outside it looks the same as the factory material (just not sagging) and on the inside, so far nobody has noticed.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Posting Permissions
Reply With Quote
