WOLFN8TR'S ///M Project Thread!

[cakM3]

Getting there Gary!!! Lookin' good


Sent from my iPhone5S using Tapatalk

[WOLFN8TR]

I feel like my car is already neglected when I come here. LOL.

I just have issues.

Getting there Gary!!! Lookin' good

Thanks...

[UdubBadger]

Gary is there a diy on vanos filter?


GoingHAM mobile

[WOLFN8TR]

Gary is there a diy on vanos filter?

Yes I will find it. Super easy thou.

You need the filter and two orings.
-22mm socket to remove the fitting
-Pull off the filter, it's just snapped on the end
-Remove old orings and install the new ones
-Reinstall and torque to 20ft lbs.

[UdubBadger]

I have the parts - had um for almost 2 yrs now actually. Just never did it Cuz I didn't know how involved it was.


GoingHAM mobile

[WOLFN8TR]

I have the parts - had um for almost 2 yrs now actually. Just never did it Cuz I didn't know how entailed it was.

GoingHAM mobile

DIY Video above...

I was surprised how easy this is. Took about 10 minutes tops. The smaller oring is harder to get off and there is a plastic spacer behind it. It's split so don't freak out thinking it broke while removing the oring like I did.

[cakM3]

DIY Video above...

I was surprised how easy this is. Took about 10 minutes tops. The smaller oring is harder to get off and there is a plastic spacer behind it. It's split so don't freak out thinking it broke while removing the oring like I did.

Gary, that plastic spacer is actually a teflon ring that should also be replaced. I replaced everything on mine....

[Pip]

Bought a Motion Motorsports Aluminum Under Panel for the ///M!! It will be here on Monday. I need to change the oil so I will install it next weekend. Picked it up for $150 shipped from a forum member. Normally $175 plus shipping.

http://motionmotorsport.net/products...products_id=43

Attachment 18544

Attachment 18545

Tell me you picked up the diffuser as well.

[UdubBadger]

DIY Video above...

I was surprised how easy this is. Took about 10 minutes tops. The smaller oring is harder to get off and there is a plastic spacer behind it. It's split so don't freak out thinking it broke while removing the oring like I did.

Thanks brotha!


GoingHAM mobile

[WOLFN8TR]

Gary, that plastic spacer is actually a teflon ring that should also be replaced. I replaced everything on mine....

Interesting. This came as a kit from ECSTUNING and there was no teflon ring.

Tell me you picked up the diffuser as well.

Rear CSL CF Diffuser?
This? http://www.m3forum.net/m3forum/showthread.php?t=500954

Thanks brotha!

Welcome...