Current:
1988 BMW 325is
1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
Sold:
"Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
2011 BMW M3 E92 6MT - Info/Maintenance Thread
Current:
1988 BMW 325is
1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
Sold:
"Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
2011 BMW M3 E92 6MT - Info/Maintenance Thread
Sorry, I don't think I do and it's in SC as you know.
If Colin doesn't drop the ride height then he should be okay with 12mm spacers. I had 12mm spacers on my rears and with the drop and Michelin PSS mounted, the tires rubbed just a little bit. I ended up putting 10mm spacers back there and the rubbing went away...the look was still perfect.
Torn upper and lower boot and broken DISA flap. Not sure what to do about the flap as he needs to go back to school next Tue or Wed. May have to loan him mine.
Still wrestling with the lower boot--tuff spot.
Thumbs, iPhone, Tapatalk.
Last edited by ELCID86; 03-21-2015 at 10:58 AM.
Also cleaned the ICV at 90,700mi.
Thumbs, iPhone, Tapatalk.
I have a spare DISA valve...if you want, I could over-night it to you as a temporary solution, assuming you want to do the GAS rebuild kit or something like that as a more permanent solution. Say the word and I'll take it tomorrow for shipment Monday.
I borrowed the DISA from my car. All back together with Stett boots. Had to trim the top and bottom of the top boot but looks good.
Thumbs, iPhone, Tapatalk.
Those boots were thrashed. As far as the disa, I would get the kit. That's what I will be doing this week.