Soldier
I started to hear a rattle when so I found that my rear HK speakers blew out. Well I bought nice aftermarket speaks from stores just to find that they wont fit the rear deck properly. So I went ahead and ordered the BSW stage1 kit. Hopefully this will work perfectly. So expensive but im hoping it will be worth it because the only other option that I had was the factory paper speakers and I dont want paper speakers.
Campieri
FYI there are adapter rings out there to mount non BMW speakers...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Messaggero
Drove about 42 miles yesterday, 0 gallons of fuel used. WOOT! Car charged overnight on 110v and was at 100% this morning.
Will be repeating today, better half and I are dog/cat/fish/house sitting for the future mother in law, her house is about 20 miles from work. This is atypical for us, my usual commute is 2.2 miles one-way. We decided to car-pool because we work about 4 miles apart and the i3 can be driven and no fuel used.
Oh, and I found and bought some clear paint protectors that go behind the door handles. Only $2.00 for 4 of them. My ZHP wasn't really scratched that bad, but our honda CRV is, I'd rather not take the chances on the i3, plus it was only $2.00 if it looks like crap I'll just throw them away. Still hunting for a similar protector for the top of the rear bumper when the hatch is open. We've almost had damage done in just the 4 days we've owned it. BMW should have some kind of protector stock in that location.
- 2021 Tesla Model Y LR-AWD '21-
- 2014 CPO i01 BEV Capparis White Tera World, '17-'20
- 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
- 2015 i01 REx Laurel Grey Tera World, '15-'17
- 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15
Big Earner
id say just have someone clear bra it
2005 BMW 330i ZHP - BMWP calipers/intake/strut bar/shifter, M3 CSL front/M3 rear rotors, Coby wraps interior, BBS CH wheels, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Messaggero
Thats probably going to be the winner. I guess some tint shop in California has one designed specifically for the i3, I'm hoping they can just cut me one and ship it to me.Originally Posted by BADCLOWN
- 2021 Tesla Model Y LR-AWD '21-
- 2014 CPO i01 BEV Capparis White Tera World, '17-'20
- 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
- 2015 i01 REx Laurel Grey Tera World, '15-'17
- 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15
Enforcer
Check with Lamin-x. They sell bumper protection for a lot of cars. If they don't list it, I'd call and ask - they may want you to be the guinea pig!
orange260z
2009 Porsche Carrera S Coupe PDK/Sport Chrono Plus - Porsche Racing Green / Sand Beige Full Leather
1999 Miata - Brilliant Black/Tan Leather
Messaggero
ordered a bunch of misc parts
Enforcer
Replaced the nav screen do to pixle burn-out. Followed the DIY's online and turns out it was really pretty straight forward.. Only really annoying factor is you have to hook up the new screen, but not completely, carry the loose mess over to the car and plug it back in to adjust and focus the screen. Then you have to take it apart again and do final assembly. Time consuming, but not a hard job.
2004 330i ZHP ESS TS2 supercharged
Silver Grey/Black leather, Xenons, factory Nav, 19" VMR V710 & 18" ZHP wheels for summer, Turner Motorsports rear sub-frame kit
Enforcer
Both cars got the airbag recall done today. I can't prove it but they went to far into a spot and messed up the bumper, pulled the lower engine cover loose and broke one of the fog lights. Didn't find it until late this afternoon. JB Welded the fog light bracket. Everything else I fixed.
Sent from my iPhone using Tapatalk
Capo di tutti capi
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Posting Permissions
Reply With Quote
