Let's talk. Like I said the vehicle spliced in is still under the center console. I think I got it at The Shack.
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member
I had it in for 4mo or so.
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member
Can someone please verify which way the two "front" differential bushing come out. It appears to me they should pull to the rear and the new ones should be inserted from the rear and pulled towards the front of the car in order to install them.
Perhaps the below pic is installing and pulling to the rear. ??
Reference: http://forum.e46fanatics.com/showthread.php?t=521636
![]()
The picture above is the bushing being installed.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Thanks for confirming.
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member
So I just installed my wheel spacers and I'm rubbing in the rear but I'm not entirely sure where. From the looks of it, it looks to be the outer bumper clip just barely rubbing. Can I take this off or cut it off? Will my bumper still be secure? Thanks guys
This pic comes from a ZHP with alcantara seats. This door card looks ok to you ? I didn't know they differ from cars with leather seats.
![]()