Did you try this?Originally Posted by Johnmadd
Wiseguy
Did you try this?
Enforcer
I don't have any deep sockets that will fit over it. I recently moved to an apartment in Florida so most of my tools are back at my house in PA. Pretty much had to buy a bunch of tools before even doing the plugs because I didn't have any.
04' Sapphire Black 330ci ZHP 6MT | Hyper Silver ARC-8s | Vibrant Performance Exhaust w/ Straight Pipes (both resonators removed) | 3.46 Diff | AKG Polyurethane Diff Bushings | Coby Wheel - Shift Boot - E-Brake Boot - E-Brake Handle - Alcantara Door Pads | Koni FSD's w/ Eibach Springs | CDV Delete w/ Steel Braided Clutch Line | Michelin PSS
Luca
Wiseguy
Gotcha.
Capo
I know you might be in a hurry but his bar is amazing fwiw.
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member
Wiseguy
That's why I put a pipe over my ratchet, it still ratchets and has the leverage I need but I'm cheap lol.I know you might be in a hurry but his bar is amazing fwiw.
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member
Wiseguy
And my craftsman ratchet is free to replace if I need to do so.
Wiseguy
I'm definitely a "shadetree" mechanic.
Enforcer
I'm cheap too but short of searching through a dumpster for a pipe to fit over my ratchet I'm stuck shelling out for a breaker bar. Too bad I could use that money for a new alcantara ebrake boot haha
04' Sapphire Black 330ci ZHP 6MT | Hyper Silver ARC-8s | Vibrant Performance Exhaust w/ Straight Pipes (both resonators removed) | 3.46 Diff | AKG Polyurethane Diff Bushings | Coby Wheel - Shift Boot - E-Brake Boot - E-Brake Handle - Alcantara Door Pads | Koni FSD's w/ Eibach Springs | CDV Delete w/ Steel Braided Clutch Line | Michelin PSS
Luca
Wiseguy
Enforcer
Go to your local Harbor Freight and you can buy a pretty decent breaker bar for like $12. Yeah, it's not Snap On, but it's kinda hard to screw up a breaker bar...
Posting Permissions
Reply With Quote
