Campieri
All of the face plates are the same except where the blanks are. You could possibly mix and match although it would be pretty hard to cut a hole in the face plate for a switch and have to look right, it would be easy if the blanks were in the right spots. It would just be a matter of removing the switches you don't need...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Campieri
BTW, I'm probably not going to put mine in for another month or two so if you guys need any more pictures, let me know
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Enforcer
Yeah, thats probably what I'll end up with. The M3 panel is the only one that works. I need the following buttons:Originally Posted by BADCLOWN
1) Heated Seat Driver 2) DSC Dynamic Stability Control 3) Spatial Surround HK Premium Sound 4) RDC Tire Pressure Control Not Used 5) Sport Suspension Mode Sprint Booster 6) Heated Seat Passenger
But RDC obviously won't be used, oh well.
Big Earner
That's what I need as well
2005 BMW 330i ZHP - BMWP calipers/intake/strut bar/shifter, M3 CSL front/M3 rear rotors, Coby wraps interior, BBS CH wheels, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Enforcer
I completed the mod this afternoon. So much nicer than having the button velcro to my console. My only issue with it, the LEDs are brighter than the OEM lights. However, I can deal with that lol.
Sent from my iPhone using Tapatalk
Capo
Awesome! Makes me want to get a Sprint Booster for this...
Messaggero
Nice
Sent from my SM-G935V using Tapatalk
Capo
that's why I have Sprint Booster in my ZHP William
Enforcer
I've had the sprint booster for over a year now, absolute love it. I hate driving the car with it disabled.
The mod wasn't too difficult, but not for the novice. You'll need a decent soldering iron and the needed supplies (wires, solder, glue, etc.)
Just some tips:
I had to melt a bit of the plastic cage the board sits in, to accommodate the wires but no big deal.
I also had to to de-pin then re-pin the small white clip on the end of the sprint booster cable. This was so I could slip it through the back vent of the console panel.
If you remember to slip the wires through ahead of time, you won't need to do this step.
Last edited by TomTomTuning; 04-13-2016 at 09:55 PM.
Wiseguy
Nice Tom! Loved my SB in my ZHP as well.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Posting Permissions
Reply With Quote
