Sigh. K
Big Earner
Sigh. K
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Campieri
I was able to sand and paint the top one but the bottom one is too hard to get to and looks like crap
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Big Earner
Ever contact DrVanos about it?
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Enforcer
Had a fun experience with aerodynamic lift at 75-80 (ish) when a flat nose RV cut in right behind me. He was a good foot off the rear bumper. Cause the car to lift and jump to the right.
Was a fun experience ��
Family that races together stays together
2005 330Ci 6MT SGM (x2)
Big Earner
Whoa freaky
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Capo
I've never experienced that, sounds terrifying.Originally Posted by PetesZ
Messaggero
Always wondered why mine did that. They also reverted the spring in my unit, and I chased starting issues for 2 years because of that. Found out by chance when I was replacing the entire unit with a used one w/ Beisan seals after stripping and drilling through the camshaft sensor screw.
Seems like their process as a whole needs some work.
Replaced originals at 230k. One boot was dry and had a lot of play, other one looked like it had some life left. Replaced both "while in there" while I was doing struts and control arms.
I run 0W40 year-long in Quebec. Cheap, approved, and works perfectly fine!
Alex - '16 Melbourne Red 328d Touring
M Sport + M Performance Package
iDrive 6 retrofit, Tunezilla Stage 2
Gone, but not forgotten: '03 Imola Red 330i ZHP - 6MT
Campieri
Yea a few years ago Dr Vanos was having issues with their process. How long a go did you replace?
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Enforcer
When replacing the coolant cap, is it mandatory to bleed the system?
I am swapping to GAS Radiator Coolant Cap.
Consigliere
No
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Posting Permissions
Reply With Quote
