Is the sound insulation liner for the hood part number 51488193941?
It looks very complex compared to what's on my car is why I ask.
Also- the expanding rivets used in the center of this part: are they reusable?
Messaggero
Is the sound insulation liner for the hood part number 51488193941?
It looks very complex compared to what's on my car is why I ask.
Also- the expanding rivets used in the center of this part: are they reusable?
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Campieri
Not sure about the liner. Can't get a pic to come up on my phone.
Those plastic rivets are reusable if you can get them out cleanly...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
That's the trick. I've broken several of these rivets before despite my best efforts.Originally Posted by Sockethead
Messaggero
Thanks, folks. My liner had shrunk quite a bit and then I cut off two of the mounting tabs, trimming it back to clear a strut tower brace. I think 51488193941 has to be the part, and I'll order up some rivets.
Enforcer
51488193941 is the number for the one I bought for my coupe, $94 shipped off eBay from a BMW dealer.
Frank W.
Present
2003 BMW 530iA Saphirschwarz Metallic
Past
2006 BMW 330ci ZHP 6MT Silbergrau Metallic
2014 BMW X1 xDrive35i ///M-Sport Mineralgrau Metallic
2011 BMW 328i 6MT ///M-Sport Alpenweiss
1999 BMW ///M Roadster Estorilblau Metallic
plus an assortment of VW, Honda, Mazda, Chevrolet, Nissan, Toyota, and others over the years
Enforcer
Anyone know where to get good quality tint it small amounts? I don't want to pay the $150-225 for my windshield that I have been quoted. Rather just do it myself. I've tried buying from shops here but they always try telling me they don't charge much for labor and can maybe take $20 off if they don't cut and install. :lol
-Holden
Enforcer
Did this today... who knows where this goes?
Sent from my SM-G925V using Tapatalk
Campieri
Looks like the bolts that hold on the front LCAB
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
If the part number is 31306779487 as shown on the bag, it's the front strut mount bolt, #4 in this diagram:
http://www.realoem.com/bmw/enUS/show...18#31306779487
Campieri
Ok, you're a little smarter than me...looking up the part number...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Posting Permissions
Reply With Quote
