Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 21 of 90 FirstFirst ... 1119202122233171 ... LastLast
Results 201 to 210 of 894
  1. #201
    My new LED tail lights (made in Korea according to a forum member) came in today.... according to him I'm about to ruin my Porsche...



    I started installing them after repositioning my car outside the garage...


    Upon initial inspection these LED tail lights did not look bad.


    These lights were literally set up as "plug-n-play" which made installing them so much easier....just like OEM

    Here's the last look of my OEM halogen tail lights.... they will be put away in the same box my new tail lights came in



    Got the new driver's side tail light installed... you can see the difference between the new tail light and the original tail light in the pic below... the Depot LED tails sure update the look of the 997.1


    Both sides completed... this was a very simple unscrew (center phillips screw) and swap....


    I then put my key in the ignition and turned on the car to make sure there were no error messages indicating a burnt out tail light... there were no error messages. Everything was normal as expected


    I went back to take a look and the tail lights look pretty good if you ask me

    Hazards engaged to see both center yellow lights light up...


    I then checked the right/left turn signals and they all worked as expected with no issues.

    The finish and quality of these Depot tail lights are very close to OEM when I compared them to my OE lenses... I am very pleased with the quality so far (notice my ZHP photobombing in the background).



    One thing to note is when I took out my tail lights... the cavity inside was dirty... looks like I will be addressing this area from time to time... just to keep things clean inside there...


    There was some residue I found on the passenger's side.... probably someone fapping near the car...


    Got everything cleaned up before installing the new tail lights. I also applied a coat of REJEX to the new tail light lens and then applied a good coat of wax for added protection...
    Last edited by cakM3; 05-17-2020 at 04:59 AM.

  2. #202
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,323
    Those new tails look great, Charlie.

  3. #203

    Charrie's 2008 Porsche 997 turbo

    Quote Originally Posted by BMWCurves View Post
    Those new tails look great, Charlie.
    Thanks!! The light output from these LED tails at night look so good! These iPhone shots don't do justice how good these lights actually are but will give you an idea just how bright they are

    This is with rear fog light on


    Rear running lights




    For some reason I couldn't get my iPhone to focus...


    Sent from my iPhone6S using Tapatalk

  4. #204
    Now you stand out, I love it!

  5. #205
    Quote Originally Posted by Johnmadd View Post
    Now you stand out, I love it!
    That's the plan John, thanks!

  6. #206
    Join Date
    Aug 2011
    Location
    Las Vegas, NV
    Posts
    5,876
    Ya those look really Sweet Charlie! I had the same problem trying to take photos of my LED fog lights at night. Too bright.
    BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
    TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
    VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k

  7. #207
    Quote Originally Posted by WOLFN8TR View Post
    Ya those look really Sweet Charlie! I had the same problem trying to take photos of my LED fog lights at night. Too bright.
    Thanks Gary! Yeah, I will grab my Nikon and try again over the weekend

  8. #208
    Join Date
    Jul 2011
    Location
    Toronto
    Posts
    735
    It didn't take long for the mod bug to kick in Charlie! Love the stealthy mods!

    -Daniel
    OEM BMW Performance (Missing cams and seats)
    LEVEL ONE // Euro Techniks
    Auto -> 6 Speed complete

  9. #209
    Quote Originally Posted by kakashi169 View Post
    It didn't take long for the mod bug to kick in Charlie! Love the stealthy mods!
    Thanks Daniel! I will be shifting back to modding my ZHP soon (CSL bootlid and 135i rear calipers)

  10. #210
    Join Date
    May 2011
    Location
    Charleston SC
    Posts
    6,149
    Looks great Charlie!

    Quote Originally Posted by cakM3 View Post
    There was some residue I found on the passenger's side.... probably someone flapping near the car...
    Ummm that would be fapping not flapping LOL
    Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
    M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
    H&R sport springs,
    UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
    Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers

Page 21 of 90 FirstFirst ... 1119202122233171 ... LastLast

Similar Threads

  1. Hornung's 1987 Porsche 944 Turbo
    By Hornung418 in forum Projects
    Replies: 790
    Last Post: 03-29-2019, 05:26 AM
  2. Detailer's Domain: Porsche 911 Turbo S Cab - Full Out
    By DetailersDomain in forum Detailing
    Replies: 2
    Last Post: 03-28-2012, 09:50 AM
  3. Detailer's Domain: Porsche Cayenne Turbo
    By DetailersDomain in forum Detailing
    Replies: 6
    Last Post: 02-08-2011, 09:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •