yea, it's starting to fail. Time to start thinking about replacing it...
yea, it's starting to fail. Time to start thinking about replacing it...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
I don't daily the car any more.
How many miles you think it has left?
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
I'm planning on overhauling the cooling system. Should I replace all the tensioners and pulleys or just the pulleys themselves?
Sent from my SM-G930F using Tapatalk
2007 BMW Z4 M Coupe | Interlagous Blue | Maritime dash and console trim | 6MT
UUC short shifter, Euro cats, CSL Euro headers, Evolve CSL Intake and tune, TC Klein Smart Design Double Adjustable Coilovers, Dinan strut brace, CDV Delete, ZHP shift knob, Arkym splitter and spoiler, WPC Bearings, ARP rod bolts, Apex Arc-8, VAC Pump Upgrade, Bluebus
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
I recently learned that all Zhp's came with heated side mirrors and when the ambient temperature drops below 0C, they heat up...
Is this accurate?
If it is, then will the mirrors heat up even when the mirror's ribbon cable is broke?
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
37 degrees Fahrenheit is the magic number. Below that, they heat up.
If it is, then will the mirrors heat up even when the mirror's ribbon cable is broke?
It depends on what kind of 'broke' we're talking about here. My original ribbons had some slight damage to them, but they still heated up. I can see a damaged cable not allowing to heat it up though, so it's case-by-case.
Thanks for correcting me!
I am not sure how bad the damage is but I cannot move either of them using the switch and it is not a switch issue... But I guess the ribbon cable in mine is snapped cause my mirrors did not heat up this past winter...
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |