Nice upgrade!
Wiseguy
Nice upgrade!
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Capo
Thanks guys. And Peter, Terra (Mirza) was a bit baffled that it didn't pick up the correct miles from the ECU he reprogrammed. He had the original cluster too and it showed 202k. I need to get PASoft working and see if the LCM will push the correct miles to the cluster.
Last edited by ELCID86; 08-06-2016 at 04:51 PM.
Capo
Replaced the engine evap breather valve.
Campieri
did you get your mileage issue straitened out?
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
No. I can't get PASoft running on my Win10 laptop after the last MS updates... :-(Originally Posted by Sockethead
Campieri
what happens when you launch PASoft?
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Capo
Hardware not read (or found)...
Campieri
Did you try rolling back the drivers?
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
No. Not quite sure how. Tried to update them to the ones in the files Tony sent me but couldn't get them to work.
Campieri
i had that issue with Windows 8 and Windows 10. try this:
go into device manager, and see if the 'BMW Scanner' is listed; if so, right click and select 'update driver', then: (from e46fanatics)
"Select the option "Browse my computer for driver software". Then pick Let me pick from a list of device drivers on my computer. Select towards the bottom "Universal serial bus controllers. On the next screen, on the left hand side under manufacturer, look for FTDI. When you click on it, to the right, select USB Serial Converter. Then click next. A message will pop up saying armageddon will reign down upon you and your computer if you install this and it isn't compatible. I decided to go for it and take the risk. Once installed, open up your bmw scanner software and start messing with all your options. "
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Posting Permissions
Reply With Quote
