Enforcer
Last week the oil level was yellow after turning it off. Checked it to be about 1qt low. Inspected and found the oil filter housing to be leaking pretty heavily.Luckily it's a 4.00 gasket, 35min. And a can of degreaser, all is well now.
Decided I need motor and trans mounts.
Big Earner
35min? Damn that's fast!
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
Capo
+1 nice job.Originally Posted by san
Sent from my iPhone with TaT.
Enforcer
Flat Rate... it's to blame lol.
Sent from my iPhone using Tapatalk
Enforcer
Got ballsy and ordered a set of ebay headers. 100' of exhaust wrap and a bunch of metal ties. Like a lot of people they arrived with fitment for a 328. The quality was lacking like you wouldn't believe. tubes over sized and off center from the head flange. welds not completed.
within a half hour of the ebay headers arriving I ordered a set of BimmerBrakes Gen3 headers!!!
Capo di tutti capi
Nice haul.
Sent from my Pixel XL using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Enforcer
Thinking of getting an intake to compliment the headers.
Found this while searching, Part Number: SP1111WB
anyone have one or seen one in person?
Messaggero
Edwin got one:
http://www.zhpmafia.com/forums/showt...ighlight=injen
It looks like a good option.
Enforcer
Headers and intake should be here this afternoon. Got on Craigslist last night and found a set of NIB E90 racks. Picked them up for 65.00 and modified the feet covers to fit. It was simple enough but may make a diy .
Sent from my iPhone using Tapatalk
Enforcer
Everything arrived
Installed the injen intake, I would say it is a nice cheap alternative to the AFE box.
The filter itself is not the one shown in the stock photos I posted earlier it has no center media just the outer.
The velocity stack is plastic I'm sure it functions just the same just not as pretty when cleaning the filter.
The intake boot had to be slackened and repositioned to mate up. Not a big deal at all.
The tab had to be removed from the coolant reservoir for the lid to fit on. I've replaced more expansion tanks than I can count and have never noticed those tabs just slide off.
The sound is there it has a lid and it fit without issue so I'd say it's
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote
