Omg that's so frustrating, like how did anyone not notice that they did that...?Originally Posted by Sockethead
How difficult is it to disassemble the housing
Sent from my iPhone using Tapatalk
Messaggero
Omg that's so frustrating, like how did anyone not notice that they did that...?
How difficult is it to disassemble the housing
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
Aw jeez that just sounds difficult, I don't even know what baking open the lens means haha, might just have to let this one kill me
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Capo
Removal: https://youtu.be/D_a_nYiwOzA
That's not my car or my accent ;-)
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - anonymous E46 fanatic
Big Earner
It's not *that* bad. You have a sedan so the housing is small enough to fit in even an apartment sized oven. You basically put it in at a low temp (200-250°) for like 10min iirc. This softens the butyl seal so you can pull it apart.
I've taken apart many a light for projector modding and retrofitting. If you decide to give it a shot, let me know. I'm happy to help coach you through it. After modding my X3 adaptive lights, nothing lighting related scares me anymore.
Sent from my iPhone using Tapatalk
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
Awesome thanks so much for the advice, I'll hopefully be able to tackle it next weekend, I'll be sure to shoot you a PM
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Campieri
You have a sedan... no need to bake. The covers have a normal gasket and just pop off.
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Big Earner
Damn, really? That's awesome. I've never seen a modern headlight that wasn't sealed with heat. Don't make me start regretting my decision to buy a coupe...
Sent from my iPhone using Tapatalk
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
Oh beautiful!
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Campieri
I think Dane or somebody had a DIY for removing the lens
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
Removing the lens is easy on a sedan. Remove the gasket/seal that clips on to the top (yes, the one that is deteriorating), remove the side corner light (one screw retainer), remove the lower trim, and you can access the clips on the bottom of the lens. The clips go all the way around the lens.
Sent from my Pixel using Tapatalk
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Posting Permissions
Reply With Quote
