Enforcer
Changed transmission fluid today with MTL, seems a bit smoother than before. Drove the car onto ramps to change it and then realized I didn't have a way to put the rear end on jack stands , so I just used 2 floor jacks and lifted it in the the back on each side hoping it wouldn't fall, but I felt safer since the front was on ramps.
Big Earner
Ordered an armrest delete kit, and the replacement seal for below the quarter window.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
1.4 bar coolant cap.
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Capo
Originally Posted by 704sw
The what, now?
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Big Earner
This piece. I ordered the matte accidentally, but it's attached to the glossy trim. I'll also fix the upper seal while I've got it all taken apart.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Big Earner
My seals are cracking too. Just the upper part where is curves aka the Nike swoosh. The lower seal is perfectly fine.
--Trevor--
Vancouver, BC
Capo
Purchased a used by clean front M3 strut brace.
Messaggero
Finally!! That's awesome. Post pics when you get around to installing it.
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Big Earner
I did the driver side upper already because its lower seal was okay. It's not that bad, although I might redo it (live and learn). Use about 4-5" of this tubing inside the new seal through the Hofmeister Kink and it'll come out great.This is aquarium tubing, but I'm sure you can get the same dimension from Lowes/HD. I used too narrow of tube the first time so it isn't as smooth as I'd like.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Enforcer
Removed drivers side wheels and cleaned with IronX all the way through the barrel of the wheel. I'll do passenger side another weekend as part of brake bleed project.
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote
