Obligatory CSL shotOriginally Posted by Rovert
With as much as you like posting pictures of it, I'm surprised how long it took you to install it!
Big Earner
Obligatory CSL shot
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Campieri
this pic gives me Mega Car Envy.
that CSL bootlid really works well with the M3 bumper, the flares, and the mirrors. it just all ties together well.
gah. i can't be looking for M3s now!
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Capo
What, tourings didn't have a CSL trunk option?this pic gives me Mega Car Envy.
that CSL bootlid really works well with the M3 bumper, the flares, and the mirrors. it just all ties together well.
gah. i can't be looking for M3s now!
Big Earner
New jack stands.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Big Earner
Damn, I was just telling Peter how much I want some ESCOs. Did you get a deal or just bite the bullet?
New jack stands.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Big Earner
Those look so much more safer than jack stands. Now I throw something under the car just in case my jack and two jack stands fail. At least I'm not squished. LOL
--Trevor--
Vancouver, BC
Campieri
LOL. before i had the rust addressed, i REALLY considered doing a widebody conversion with the hard motorsport M3 flares - and have them molded into the body. but that was going to be a lot of work, require new wheels, etc.... not great right now.
maybe someday.
yeah, those are nice. really nice. i have 6 jack stands, and i'd have to replace at least 4 with those.
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Big Earner
How do you know when stands need replacing?
--Trevor--
Vancouver, BC
Big Earner
My back left jack-pad is sunken in. I haven't really been able to tell if it's fixable, or something I'll have to live with. The flat top and rubber pad of the ESCO would give me A LOT more peace of mind compared to the ol' 3 ton Craftsmans.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Big Earner
Bite the bullet. I watched them tick up from $30 a pop to $45 a pop. Got laid off at work, so I couldn't buy when they were cheap. Have a new job now. I tried emailing the company asking about pricing, etc, NO response. Oh well.
I figured it's something that will hopefully last me a lifetime. If I'm gunna be under them, I want them to be top notch.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Posting Permissions
Reply With Quote
