Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Call me Seth
CURRENT: 2016 Long Beach Blue BMW /// M2
RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
'04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Anyone have the TCU bracket for a sedan?
-Jeff | '19 JGC WK2
Sold: '03 ZHP
"There is a straight six engine at the front, a manual gear box in the middle, and drive goes to the back. That's page one, chapter one from the petrolsexual handbook." - Jeremy Clarkson
Does anyone by chance have the front self leveling headlight sensor? 1 in this diagram...
http://www.realoem.com/bmw/enUS/show...diagId=31_0409
Wanted to see if I can buy one for cheap before purchasing a new one to replace the broken one on my car.
I have the following '04 ZHP sedan parts - just cover shipping. I can email pics if anyone is interested.
-110k steering guibo. I ordered a new one trying to find a noise...the old one was totally fine and not the source of the noise.
-110k inner/outer tie rods. Same story as above (noise). The tie rods were 100% solid. The only potential issue is that the ball joint separator may have marred the allen wrench hole slightly and the top thread when I got them out.
It's probably a long shot someone wants used parts that can be bought new for not that much - but thought I'd ask before throwing out.
I have 2 OE caliper bleed screws if anyone wants them. Turns out the 135i Brembos use a different screw, and these won’t work for me.
I’m also looking for a part number on the 135i/BMWP bleed screw, if anyone knows it.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors