The Random E46/ZHP Question Thread

[ZHPizza]

Here's some great reading about the patent: https://www.google.com/patents/US6575611

What's the number on the sticker? 75923681?

The sticker is on the wiring harness so I ignored it

What about the # in the middle right, under the lines with "ABS?" Looks like it might be broken into 2 lines, followed by the "L."

Yeah it's some BS. No BMW part number that I can see on the base plate anywhere.

[anandoc]

The sticker is on the wiring harness so I ignored it

Yeah it's some BS. No BMW part number that I can see on the base plate anywhere.

The part# should be on a sticker (which ofcourse would have peeled off - stupid BMW supplier)

[BMWCurves]

There's still no one out there that's figured out how to get shift lights on an E46 M3 cluster to work on a non-M car, correct? This guy seems to have but it doesn't really look right, like it's just all at once at 6,500 RPM:



Hoping (in vain lol) that Terra will eventually figure it out but I doubt car mods anywhere on his radar right now.

[ELCID86]

There's still no one out there that's figured out how to get shift lights on an E46 M3 cluster to work on a non-M car, correct? This guy seems to have but it doesn't really look right, like it's just all at once at 6,500 RPM:



Hoping (in vain lol) that Terra will eventually figure it out but I doubt car mods anywhere on his radar right now.

Want.

[Prestovie]

2nd gear seems to be rather difficult to smoothly engage lately. First and third are both fine, clutch was replaced just 6months ago. I mean I really have to "grind" it, first gear is normal and third gear is a breeze.


Sent from my iPhone using Tapatalk

[az3579]

Could someone please find me the part number for the plastic cap thing in the spare tire well that holds the trunk floor up? I didn't realize that this piece existed, so after struggling with the floor collapsing for years under the weight of my tool box, I'm fed up. Now that I know it exists, I need to buy one, but can't for the life of me find the part number.

It's the black cap in this pic:

[ZHPizza]

Could someone please find me the part number for the plastic cap thing in the spare tire well that holds the trunk floor up? I didn't realize that this piece existed, so after struggling with the floor collapsing for years under the weight of my tool box, I'm fed up. Now that I know it exists, I need to buy one, but can't for the life of me find the part number.

It's the black cap in this pic:

#gotem

Pad H=50MM 1 51471944899 $3.37

http://www.realoem.com/bmw/enUS/show...diagId=71_0183

[az3579]

#gotem

Pad H=50MM 1 51471944899 $3.37

http://www.realoem.com/bmw/enUS/show...diagId=71_0183

THANK YOU!
RealOEM is such a biotch to browse sometimes...

Category "Equipment Parts > Car tool/lifting jack" = LOL

[L0veZHP]

What do you guys think?

-Tint the front windshield 35%?
(Leave the 20% on the sides)

- Remove the tints and go lighter %?

- Fish Bowl?



Sent from my iPhone using Tapatalk

[704sw]

I know people like the fish bowl look, so this will be an unpopular opinion: I'd definitely keep some kind of tint. You put WAY too much into that interior to let the sun destroy it. I think 20% is too dark, and I'm not keen on tinted windshields (Air Blue 80 is okay, though). I have 40% and think it looks great with the dark headliner. From the outside it's actually a touch darker than I'd prefer, but it looks darker because of the black seats.