So...I thought I would share my review of this product.
Rating...8/10.
So....you start by taking the whole bottle and all the hose out of the box. Instructions are very clear and easily used.
What you do is secure the pinch clamp, and lower pressure inside the bleed reservoir to 15" of vacuum. 15 is max...and found myself setting between 10 and 15.
Next, remove the dipstick, and stick the small diameter, hard plastic tubing down the dipstick hole. Gently tap the bottom of the oil pan.
Then, release the pinch clamp, and in about 15 minutes....I had 6.5 qts of dark 0W-40 sitting in the reservoir.
I attribute the extra lack of 6.9 qts to whatever was in the filter and maybe a small amount in the pan.
Remove tubing and replace dipstick.
Concern: I believe that the pinch clamp, over time, will weaken the tygon, and I will prolly just use it this way until it fails. At this point I will either splice in a small valve, or something else.
Clean up was a breeze....and I like not having to get under my car to change the oil/
Connection provided for bleeding brakes too....which rocks.
Available here for 65 bux less shipping.
http://www.amazon.com/gp/product/B00...SIN=B000AAJSOE