How's your tire pressure?
Campieri
How's your tire pressure?
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Enforcer
fair point considering the car has been sitting lol I'll have to check in the morningOriginally Posted by Sockethead
2004 Titansilber Metallic BMW 330i ZHP
Messaggero
I had a hell of a time getting the oil cap to unscrew in the cold. Common issue? Would a new cap help?
Capo
I think the solution will be a new gap. Mine is very old, so the gasket is probably shot on it.
IIRC the gasket can be replaced separately, however. Personally I'll be buying a new cap.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Messaggero
I remove the gasket, lube it, and flip it over to see if I can get a few more miles out of it.
2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats
Big Earner
Yea the gasket is like $7
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Soldier
Who has done a shifter rebuild kit, and what do you think? ESC Tuning has a few on sale now.
Big Earner
Paging @slater
I did mine, and honestly it’s mushy af going into 5th (I have to shift with a purpose). Every other gear is tight though. I paired it with a Garagistic DSSR.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Big Earner
I have the rebuild/upgrade kit but haven't installed it yet. Actually didn't want the poly rear bushing, but they had just changed it over when I ordered mine in late November, for $2 less than their new 'sale' price.
Consigliere
There is a new rear bushing from Turner Motorsports available fyi.
I also have a rebuild kit that I will be using when I do the clutch job.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Posting Permissions
Reply With Quote
